[Asterisk-Users] Hypothetical IAX2 situation

[Kris Boutilier]

This is the purpose of the 'native transfer' feature controlled on a
per-peer basis by the 'notransfer' directive in /etc/asterisk/iax.conf.

Asterisk box '*a' will, some time shortly after a 'source -> *b -> *a -> *b
-> destination' call path has been set up, quietly step out of the way and
connect the endpoints directly to each other. In this case, it means the
call will be taken off of the network and bridged internally to *b.

Hope that helps. 

Kris Boutilier
Information Systems Coordinator
Sunshine Coast Regional District

> -----Original Message-----
> From:	Sean Kennedy [SMTP:skennedy at tpno.org]
> Sent:	Wednesday, December 01, 2004 3:00 PM
> To:	Asterisk Users Mailing List - Non-Commercial Discussion
> Subject:	[Asterisk-Users] Hypothetical IAX2 situation
> 
> Two * servers:  *a and *b.
> 
> Outside call comes in *b, and is automatically routed to *a.  Someone on 
> a sip phone connected to *a then decides to transfer the call to someone 
> on a sip phone connected to *b.  The transfer works.
> 
> At this point, is *a still in the converstation?  Or is * smart enough 
> to see where the data stream is going/coming from?
	{clip}