[Asterisk-Users] Polycom IP500

[Tim Jackson]

Any idea if 1.34 fixes the problems with the phones being up for long
periods of time and weird call problems (I cannot hear remote caller,
but they can hear me) ?

-Tim

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul Hales
Sent: Wednesday, December 01, 2004 6:00 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom IP500


Any idea if 1.34 makes Daylight Savings work for us people in Australia?

PaulH 

-----Original Message-----
From: Andrei (MPI) [mailto:asterisk at markovprocesses.com] 
Sent: Thursday, 2 December 2004 9:30 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom IP500

Hi Chris,

First of all,  you need to configure ftp or tftp and watch syslog
closely -
what the phone is looking for at boot time. You would need to put config
files into (t)ftp directory, named according to MAC address of you
phone.
XML and Web is really weird - they do not even share same config data.
For
example, I had to change address of SNTP server (clock) and it still was
showing as 'clock' on Web admin page for the phone. I will email you the
config files I got from a good fellow from this list not so long ago...
and
those config files do really help!

Also, I suggest that you upgrade your SIP firmware if you have not done
it
yet. I got the Polycom 500 with firmware which was very old and
incapable to
work with asterisk. Mine is 1.3.1 now
(http://www.freedomphones.net/polycom/files/).

If anyone has SIP firmware 1.3.4 - please make it downloadable somewhere
on
the internet?

Thank you,
Andrei

Chris Cherry wrote:

>Hey All,
>
>First Time Writing.
>
>I'm trying to set up my IP500 phones to register SIP with *. I input 
>all the (I assume) correct data in to the fields on the Web Interface. 
>And I get no notification that the phone is even attempting to 
>register, no failed messages etc. I have read that the Web interface is

>crap and the XML config files is the way to go. Does anyone have a 
>basic config file that doesn't change any defaults? I couldn't seem to
find
one.
>
>Extra Info:
>Server is 192.168.0.3
>Phone name/ext I want to be 301
>
>Thanks,
>Chris Cherry
>
>  
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
CAUTION: This email message and accompanying data may contain
information
that is confidential. If you are not the intended recipient, you are
notified that any use, dissemination, distribution or copying of this
message or data is prohibited. If you have received this email message
in
error, please notify us immediately and erase all copies of this message
and
attachments. Thank you.

CAUTION: This email message and accompanying data may contain
information that is confidential. If you are not the intended recipient,
you are notified that any use, dissemination, distribution or copying of
this message or data is prohibited. If you have received this email
message in error, please notify us immediately and erase all copies of
this message and attachments. Thank you.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users