[Asterisk-Users] T100P Configuration for Mixed Voice & Data

[Shawn Kelley]

I need to know how to setup the data side of the T1 on my Linux Box. I
have found information about configuring a PRI and HDLC but nothing
about the Frame-Relay type setup for data.

The following is information from our T1 provider.
Network T1:
	Framing = ESF
	Line code = B8ZS
	Build out = 0-133ft(DSX)/0dB(CSU)
	Clock = network
	Pulse-density-enforce = off
	alarm-option = on
	alarm-delay = 15
	is-slave = off

DS0 Provisioning:
	analog-begin = 1
	analog-end = 16
	data-begin = 17
	data-end = 24
	alignment = same

(The following is what our Vina T1 Integrator currently has in its
settings. Our Linux box will replace the Vina)
Synchronous Interface: 
	encapsulation = Frame-Relay
	HDLC-inversion = off
Encap-data:
	LMI-Type = T1.617-annex-D
	N391 = 6
	N392 = 3
	N393 = 3
	T391 = 6
PVC1 :
	DLCI = 100
	IP = ---.---.---.---
	netmask = 255.255.255.252
	RIP = disabled
	NAT = OUT

Thank you for the help ahead of time!
--Shawn