[Asterisk-Users] just-added second X100P

[spectro]

I finally found out the second card was in RED Alarm by running zttool
(cat /proc/zaptel/2 also works). The analog extension in our Merlin
Legend was bad. Plugging the X100P to another available extension
solved the problem.



On Sun, 22 Aug 2004 10:53:46 -0500, spectro <spectro at gmail.com> wrote:
> I ran it like 10 times just in case:
> 
> [root at pbx asterisk]# ztcfg -vv
> 
> Zaptel Configuration
> ======================
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 
> 2 channels configured.
> 
> 
> pbx*CLI> zap show channels
>    Chan Extension  Context         Language   MusicOnHold
>  pseudo            inbound-analog
>       1            inbound-analog
>       2            inbound-analog
> 
> 
> Still not working.
> 
> 
> 
> 
> On Sat, 21 Aug 2004 09:30:19 -0700, Mike Benoit <ipso at snappymail.ca> wrote:
> > Although it shouldn't make a difference, try:
> >
> > channel => 1-2
> >
> > As well, did you run ztcfg after you installed the new card? I've found
> > sometimes I've had run ztcfg a couple times before Asterisk would "kick
> > in" and recognize a new card.
> >
> >
> >
> > On Sat, 2004-08-21 at 02:49 -0500, spectro wrote:
> > > I just added a second X100P card to my * server, altough it seems to
> > > be working * seems to be ignoring it:
> > >
> > > zaptel.conf:
> > > -----------------
> > > fxsks=1-2
> > > loadzone=us
> > > defaultzone=us
> > >
> > > zapata.conf:
> > > ------------------
> > > context=inbound-analog
> > > signalling=fxs_ks
> > > group=1
> > > channel => 1
> > > channel => 2
> > >
> > >
> > > I created a couple of test extensions:
> > >
> > > ; test extensions
> > > exten => 4390,1,Dial(Zap/g1/4189)
> > > exten => 4390,2,Congestion
> > > exten => 4391,1,Dial(Zap/1/4189)
> > > exten => 4391,2,Congestion
> > > exten => 4392,1,Dial(Zap/2/4189)
> > > exten => 4392,2,Congestion
> > >
> > > 4391 works fine, 4392 doesn't:
> > >
> > >     -- Executing Dial("IAX2/vperez at vperez/2", "Zap/2/4189") in new stack
> > > Aug 21 02:47:36 NOTICE[426002]: app_dial.c:714 dial_exec: Unable to create chann
> > > el of type 'Zap'
> > >   == Everyone is busy/congested at this time
> > >
> > > I don't know what's wrong, Zap/2 shows fine in the zap channels list:
> > >
> > > pbx*CLI> zap show channels
> > >    Chan Extension  Context         Language   MusicOnHold
> > >  pseudo            inbound-analog
> > >       1            inbound-analog
> > >       2            inbound-analog
> > >
> > >
> > > Any ideas?
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > --
> > Mike Benoit <ipso at snappymail.ca>
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>