[Asterisk-Users] UK Disconnect supervision with TDM400P

[Richard Scobie]

Edward Eastman wrote:

> 
> I've got a TDM11B with the fxo port plugged into a standard UK BT PSTN line,
> loading wcfxs with OPERMODE=UK.  All's working well, except if I get an
> incoming call through my bt line, and the remote party hangs up, I get
> approx 20secs of the bt line hungup tone before asterisk hangs up, which
> leads (if nothing else) to the well documented 20secs of beep on vm problem
> :)
> 
> I have tried: busydetect=yes / busycount=7 / other busycounts /
> callprogess=yes but none of these make any difference.  I have
> loadzone/defaultzone=uk and country=uk in indications.conf and fxs_ks
> signalling.
> 

Try increasing your RX gain in 1db steps, until it reliably hangs up.

I had a box with X100Ps which busydetected perfectly with default gain 
settings. When they were replaced with TDM FXOs, busydetect stopped 
working and I needed 3db of RX gain added to get it working again.

Regards,

Richard