[Asterisk-Users] IAXy Power in Australia?

[Roy Eddleston]

Jeremy

I am in the UK but the IAXy's (x5) I just received from the states have
120VAC/9VDC 800mA supplies, I questioned this, but the supplier stated
that this was what Digium are shipping with the IAXy.

Digium state 1500mA on their docs but DigitNetworks state 1200mA on
theirs, but ship the 800mA

So far they are operating fine with UK spec phones, but time will tell
if the 800mA is enough, I am going to measure the current drain when I
get a few minutes.

Cheers!

Roy...

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Jeremy Bogan
> Sent: 28 August 2004 08:08
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] IAXy Power in Australia?
> 
> > http://www.dse.com.au/cgi-bin/dse.storefront/
> > 412ff6210573f994273fc0a87f9
> > c0726/Product/View/M9917
> 
> I emailed Dick Smith with the requirements but none of the power
> supplies they have can do the 1500mA.
> 
> --
> jeremy bogan    [ jeremy at segpub.com.au ]
> segment publishing - design.develop.host
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users