[Asterisk-Users] TDM400P lockups (FXO)

[Michael George]

On Wed, Aug 25, 2004 at 10:28:52AM -0600, Marty Mastera wrote:
> 
> I had similar issues with my TDM400P (loaded with 4 FXO, or TDM04B as
> configured).  I tried switching modules around on the board, upgrading
> CVS, etc....nothing helped.  Ultimately Digium told me that it was a
> hardware problem in the board revision that I had.  They had me email
> them the serial numbers from the board and each FXO module - it was
> determined that I needed a new board.
> 
> The new board that they sent me has a jumper wire connected between two
> points on the backside of the card. (That's how I know the new card is
> somehow different from the old).  I installed the new card into my
> customers * box almost 3 weeks ago - so far everything has been working
> great with no problems reported.

I just deployed by * system and had this happen once.  Based on input from the
list, I figured it might have been because of interrupt sharing.  Now I'm
starting to wonder, though, if maybe my FXO is also flawed.

Did Digium indicate how recently they made the change on the boards?

-- 
-M

There are 10 kinds of people in this world:
	Those who can count in binary and those who cannot.