[Asterisk-Users] asterisk & chan_sccp

[Matthew Boehm]

I don't see any speed dials setup on the devices in sccp.conf.

Ex:

[SEP000F3442E199]
description = Jack's 7960
type = 7960
context = sccp
tzoffset = -6
autologin = richard,neill
speeddial = 4,John Doe
speeddial = 7,Jack Trades
speeddial = 8,Richard Doofus

These all work great for my 2 7960s. It could be that you are pushing the
button and * is seeing that there isn't anything to dial.

Matthew

----- Original Message ----- 
From: "Chad Whitten" <chadwick at eipi.net>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, August 25, 2004 3:24 PM
Subject: [Asterisk-Users] asterisk & chan_sccp


> ive got asterisk running with chan_sccp and three cisco phones (2 7910's
and 1
> 7960).  lots of bugs.  when i press the speed dial button on either 7910,
> asterisk dies.  also, if i dial from the 7910 to 7910, everything works
fine.
> i can dial from or to the 7960 once, and then one of the 10's and the 60
die
> and try to reregister.
>
> if i take the 7960 out of the mix and remove its configs from sccp.conf,
etc,
> the 7910's work fine.
>
>
> here is the error i get on the speed dial crashing asterisk
>
>   ==  >> Got message StimulusMessage
>     -- Got {StimulusMessage} stimulus=SpeedDial(2) stimulusInstance=1
> Segmentation fault
>
>
>
> using skinny load of P00403020700
> asterisk 1.0-RC1
> chan_sccp - lastest from chan_sccp at sourceforge
>
> here is sccp.conf
>
> [general]
> keepalive = 5
> context = sccp
> dateFormat = D-M-Y
> bindaddr = 206.156.254.118
> port = 2000
>
> [SEP0004DD1E63CF]
> type        = 7910
> autologin   = test1
> description = Test2 7910
> context     = sccp
>
> [SEP0005323DB87B]
> type        = 7910
> autologin   = test2
> description = Test2 7910
> context     = sccp
>
> [SEP0002B9A754BD]
> type        = 7960
> autologin   = test3
> description = Test3 7960
> context     = sccp
>
> [test1]
> id          = 1001
> label       = Test1
> description = Test1
> context     = sccp
> callwaiting = 1
> mailbox     = 1001
> callerid    = "Test Line 1", <1001>
>
> [test2]
> id          = 1002
> label       = Test2
> description = Test2
> context     = sccp
> callwaiting = 1
> mailbox     = 1002
> callerid    = "Test Line 2", <1002>
>
> [test3]
> id          = 1003
> label       = Test3
> description = Test3
> context     = sccp
> callwaiting = 1
> mailbox     = 1003
> callerid    = "Test Line 3", <1003>
>
>
> and extensions.conf
>
> [sip]
>
> exten => 5139,1,Meetme,54321|q
>
> exten => 7000,1,Ringing
> exten => 7000,2,Wait(2)
> exten => 7000,3,VoicemailMain
>
> [sccp]
> exten => 1001,1,SetCalledParty("Test1"<1001>)
> exten => 1001,2,Dial(SCCP/Test1,10,tr)
> exten => 1001,3,Voicemail,u1001
> exten => 1001,102,Voicemail,b1001
>
> exten => 1002,1,SetCalledParty("Test2"<1002>)
> exten => 1002,2,Dial(SCCP/Test2,10,tr)
> exten => 1002,3,Voicemail,u1002
> exten => 1002,102,Voicemail,b1002
>
> exten => 1003,1,SetCalledParty("Test3"<1003>)
> exten => 1003,2,Dial(SCCP/Test3,10,tr)
> exten => 1003,3,Voicemail,u1003
> exten => 1003,102,Voicemail,b1003
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Chad Whitten
> Network Administrator
> neXband Communications
> cwhitten at nexband.com
> 601-944-4801 Phone
> 601-944-4803 Fax
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>