[Asterisk-Users] TE410P - ZT_CHANCONFIG failed

[Peter Svensson]

On Fri, 20 Aug 2004, Arnaud Pignard wrote:

> I try setup a TE410P. Already setup E100P without problem. I also check 
> sample zaptel.conf config in mailing list and seems my config is ok.
> However when i modprobe wct4xxp, here is error output :
> 
> ZT_CHANCONFIG failed on channel 97: No such device or address (6)
> FATAL: Error running install command for wct4xxp

Have you configured the spans for E1 signalling? It sound like you have 
them set for T1 signalling (24*4=96). You should check the jumpers on the 
card.

Peter