[Asterisk-Users] Inter-digit timers on t100

[Kris Boutilier]

For the inbound digit problem try adding :

 debounce=50                     ; Needed to reduce the initial off hook
debounce

in the relevant context for those trunks in /etc/asterisk/zapata.conf

Also, are you using 'immediate=yes'?

-----Original Message-----
From: Tony Nichols [mailto:tony at mail.applog.com]
Sent: August 18, 2004 1:48 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Inter-digit timers on t100


On Tue, 2004-08-17 at 14:08, Jason Kawakami wrote:
> Hello all-
> 
> So I have * up and running and connected to a legacy system via em_w lines
> and have no trouble dialing from * through the tie line but from the PBX
> across the tie line I am having intermittant receipt of the DTMF.  T-Berd
> testing is showing that the digits are coming across but * is either
missing
> the first digit consistantly.
> 
> This seems to me to have something to do with start timers or inter-digit
> dtmf timers or something.
> 
> I have even tied 2 * together each with t100 cards and have the same
> problem.
> 
> Not sure how to proceed, any suggestions?
> 
> Jason Kawakami
> 
I had nearly the same issue between * and an nec pbx. The only way I
could get around it was to either make the number a speed dial, or tell
the users if the call failed to use the redial button on their phones.
However * had issues with the last digits, not the first.

The wiki has a section on the inter digit timers, but all the examples
I've seen are confined to incoming calls to voicemail.

t o n y  

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users