[Asterisk-Users] Static on outgoing calls using either X100P or TDM400P

[Ben Merrills]

I'd just ask for an end to end test, and line survey if needs be. You
want them to be testing for static along the call route; your line might
in fact be a number of lines tagged together (for example if you have a
EuroISDN line).

Ben

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ryan
Courtnage
Sent: 16 August 2004 17:24
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Static on outgoing calls using either
X100P or TDM400P

Ben Merrills wrote:

>>Hello.  I've seen several posts talking about line quality using
Digium 
>>cards that are sharing IRQs or on machines where X is running but
after 
>>trying all of those fixes I am still having a problem with line static

>>on outoing calls. 

>Apart from that, get a line test done. Your telcom provider should do
>one at your request.
>
Any idea what you would ask the telco to test for? 

I too have seen tdm400ps stop working and output only static noise 
(requiring wcfxs module reload).  The solution to the problem is never 
the same.  Sometimes changing PCI slots, relocating the computer, using 
a noise reducing powerbar, even changing computers completely.  In all 
cases, I'm not 100% confident that the problem has been resolved for
good.

If there is a phone-line condition that will trigger the tdm400p driver 
to go into this non-functional state, I'd love to know what it is, and 
how to test for it.

Thanks
Ryan

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users