[Asterisk-Users] te410p and Telstra Onramp 10

[Craig Guy]

Thankyou very much for that :)  I assume you would be using DNIS to match
the called number to internal extensions inside the dialplan?

Our eval system used an X100p with internal Grandstreams.  Call quality was
excellent except to mobile phones which had a pronounced echo that only the
internal party could hear.  I am thinking this was due to the X100p and
should go away once using the onramp.  I'll be putting in a wiki entry
regarding this config once it's all set up.

Craig

----- Original Message ----- 
From: "Adam Goryachev" <mailinglists at websitemanagers.com.au>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, August 14, 2004 9:36 AM
Subject: Re: [Asterisk-Users] te410p and Telstra Onramp 10


> On Fri, 2004-08-13 at 22:06, Craig Guy wrote:
> > Hi,
> >
> > now that these cards have approval in Australia, has anyone had any luck
in
> > connecting them to a Telstra Onramp 10 service?  Are these configured as
a
> > PRI, bchan=1-10, dchan=16 in zaptel.conf and switchtype=euroisdn in
> > zapata.conf?  Better yet anyone have any of the above .conf files they
could
> > share?
>
> Yes, it works fine... although I get 'static' on calls connected to
> 'some' numbers (sometimes).... Where static could be echo/feedback/weird
> sounds while the remote person talks. Only the remote person hears it.
> zaptel.conf:
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-10
> unused=11-15,17-31
> dchan=16
>
> asterisk/zapata.conf
> [channels]
> usecallingpres=yes
> relaxdtmf=no
> rxgain=0.0
> txgain=0.0
> busydetect=no
> pridialplan=local
> nationalprefix=0
> internationalprefix=0011
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=no
> cancallforward=no
> callreturn=no
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> callerid=asreceived
> adsi=no
> callprogress=no
>
> switchtype => euroisdn
> signalling => pri_cpe
> callgroup => 1
> group => 2
> immediate => no
> context => remote
> channel => 1-10
>
> That's what I use... If anyone happens to see something I am doing which
> might break things/cause the problems I am having, please let me know...
>
> I would also be interested to hear how your setup goes... Mostly I have
> the problem when I call my mobile from a TDM FXS port on the same
> asterisk box.
>
> > Is an onramp 10 what is referred to as a 'channel bank'?
>
> No, channel bank converts the E1/T1 into  analogue lines.
>
> Regards,
> Adam
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>