[Asterisk-Users] Dial command problems

[Michael Little]

Lyle,

I tried your suggestion, but it still does not work.



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Lyle Giese
Sent: Friday, August 13, 2004 2:19 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Dial command problems

Shouldn't that read:

exten => 231,1,Dial(Zap/g1/231,30)

Now it should be 30 seconds, which should be 30/6 or about 5 rings.

Lyle

----- Original Message ----- 
From: "Michael Little" <mlittle at iqep.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 13, 2004 12:15 PM
Subject: [Asterisk-Users] Dial command problems


I am still testing Asterisk, but I am running in to a lot of problems.
I set up numerous extensions, but Asterisk is not performing to tasks
correctly.  Here is an example.

exten => 231,1,Dial(Zap/g1/231|3)
exten => 231,2,Voicemail(u231)
exten => 231,3,Hangup

When I call in and enter extension 231, my call is routed to the correct
extension, but it just keeps ringing.

If I change the line to read exten => 231,1,Dial(Zap/g1/231|2) it will
ring once (2000 ms) and go to voicemail, but if I change the timeout to
anything greater than 2 it never rolls to voicemail.


I am attempting to configure Asterisk as a voicemail and automated
attendant solution.  It will be connected to a Toshiba Strata PBX.

Assistance is greatly appreciated.

Michael
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users