[Asterisk-Users] outgoing ZAP cannot connect using E1 isdn

[Asterisk]

Thanks to pointers from Peter Svensson, I've solved the problem.

I needed pridialplan=unknown in my zapata.conf

All's good to go ! I can now call numbers with the leading zero !

Thanks very much.

Julian.

----- Original Message ----- 
From: "Asterisk" <asterisk at dotr.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 13, 2004 8:37 AM
Subject: Re: [Asterisk-Users] outgoing ZAP cannot connect using E1 isdn


> Spooky - I was at this second about to report that I have got it working,
> though I don't know why ...
>
> If the number I want to call is 07803xxxxxx then if I say
> Dial(Zap/g1/7803xxxxxx) the damned thing works.
>
> So it seems that something is automatically adding the "0" to the dialled
> string. What would be doing that ?
>
> I'm going to try your suggestion of the pridialplan and prilocaldialplan
and
> see what difference this makes. However, where do I put these commands and
> what data should I set it to ? (google here I come!)
>
> Many thanks for taking the time to respond.
>
> Julian
> ----- Original Message ----- 
> From: "Peter Svensson" <psvasterisk at psv.nu>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, August 13, 2004 8:12 AM
> Subject: Re: [Asterisk-Users] outgoing ZAP cannot connect using E1 isdn
>
>
> > On Thu, 12 Aug 2004, Asterisk wrote:
> >
> > > What I can do: Call from outside into the asterisk, dial an extension,
> and
> > > pass through to the meridian. WooHoo.
> > >
> > > What I can't do: Call from outside (firstnum) into the asterisk , dial
> an
> > > extension which calls an outside number (SecondNum). I get the BT
> three-tone
> > > (number has not been recognised). Is it that the outgoing number is
> being
> > > mangled ? If so, where to look ?
> >
> > Can you place any calls from Asterisk to the pstn? If not then I suspect
> > you need to set the pridialplan (and later on prilocaldialplan for
> > CallerID) to something. Exactly what depends on the number format you
use.
> > For the standard national number format I think "pridialplan=unknown" is
> > the way to go.
> >
> > You could try enabling debugging with "pri intense debug span 1" to see
> > exactly what the pstn returns.
> >
> > Also, since you are on a pure tdm path you may want to try disabling
echo
> > canceling. It has nothing to do with your current problem though.
> >
> > Peter
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>