[Asterisk-Users] Problems receiving SIP calls

[Simon Brown]

I have tried with insecure=very in the [sipgate] section of my sip.conf.
This stops outgoing calls from working and still no incoming calls.  Taking
it out reverts to outgoing working but incoming still reporting "unable to
authenticate ..."
I stopped and restarted asterisk after each change.

Simon Brown 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Thorsten Huber
Sent: Thursday, 12 August 2004 23:01
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Problems receiving SIP calls

Hi,

On Thu, Aug 12, 2004 at 07:42:28AM -0600, Rich Adamson wrote:
> There has been far more then one implementor that didn't realize that 
> many of the changes made to sip.conf (and other config files) are not 
> used unless you stop and restart asterisk. A Reload doesn't cut it.
> Are you sure you're restarting asterisk after the parameter changes?

I've checked that again. And you're right. I've restarted asterisk after
inserting "insecure=very" but only reloaded after commenting it out.

-- 
Gruss / Best regards  |  LF.net GmbH        |  fon +49 711 90074-414
Thorsten Huber        |  Ruppmannstrasse 27 |  fax +49 711 90074-33
th at LF.net             |  D-70565 Stuttgart  |  http://www.lf.net 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users