[Asterisk-Users] DTMF issues

[AJ Grinnell]

I hadnt heard of that setting until today either, but it still doesnt work.
I am using dtmfmode-rfc2833 in sip.conf, and I have my spa's set to avt or
auto. The "internal" dtmf used for voicemail or anything within * works just
fine. I hust cant get tones out to the PSTN. The DTMF sounds very distorted
on the other end of the call. I am trying to use rfc2833. If you have any
ideas, please let me know. Thank you.


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Greg Hill
Sent: Tuesday, August 10, 2004 1:32 PM
To: Asterisk
Subject: Re: [Asterisk-Users] DTMF issues


On Tue, 10 Aug 2004, AJ Grinnell wrote:

> I am now at a total loss. Using Sipura spa-2000s connected to *, I get
> DTMF working just fine for internal extensions, voicemail, etc. If
> making an outgoing call like this spa --> * --> Cisco AS5350 --> PSTN, I
> get no dial tone. I am working unsuccessfully with Cisco right now on
> this, but they cant find anything wrong. I have tried all suggestions I
> can find from the list and elsewhere. I have added SIPDtmfMode to my
> outgoing extensions, that still doesnt help. Does anyone out there have
> experiance or ideas with this setup?

I haven't heard of any SIPDtmfMode setting, but there is dtmfmode= (in
sip.conf, not extensions.conf). Which dtmf mode are you hoping to use?

Greg


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--

This message has been scanned by Arialink for dangerous content and is
believed to be clean. For more information please email support at arialink.com