[Asterisk-Users] E1 monochannel :-(

[Marc C Storck]

Your trying to open channel 1 (ZAP/1) to create
another call....

If you grouped all your channel correctly, then
try using ZAP/g1 (see that "g" before the "1")

in /etc/asterisk/zapata.conf you should have
something like

group = 1
channel => 1-15,17-31

In that case everything should work fine!

Regards,

Marc

--
Network Manager                Marc Storck
LuxAdmin.Org                  
mstorck at luxadmin.org
Internet Service Provider     
http://www.luxadmin.org
15, route d'Esch               Phone: +352 2727
3030
L-4544 Belvaux                 Fax:   +352 2659
0873

-------------- LuxAdmin powered service
---------------
http://www.Gateway.lu          Your gateway to the
net

     Advantages of ADSL solutions by LuxAdmin:
             - price: cheap and clear
             - products: proven quality
             - support: friendly and helpful
-------------------------------------------------------

----- Originalnachricht -----
Betreff: [Asterisk-Users] E1 monochannel :-(
Von: horape at tinuviel.compendium.com.ar
An: asterisk-users at lists.digium.com
Datum: 06-08-2004 17:18


> Hola!
> 
> I'm using asterisk as H.323 -> PRI gateway.
First call goes
> thru ok, second concurrent call fails with:
> 
> Aug  6 11:52:30 DEBUG[737292]: chan_h323.c:1038
setup_incoming_call: Sending  to context [ip2pri]
>     -- Executing
Dial("H323/ip$192.168.32.25:60271/984",
"Zap/1/9541163107100") in new stack
> Aug  6 11:52:30 NOTICE[753677]: app_dial.c:554
dial_exec: Unable to create channel of type 'Zap'
> Aug  6 11:52:30 NOTICE[753677]: app_dial.c:554
dial_exec: Unable to create channel of type 'Zap'
>     == Everyone is busy at this time
> Aug  6 11:52:40 WARNING[753677]: pbx.c:1836
ast_pbx_run: Timeout, but no rule 't' in context
'ip2pri'
> Aug  6 11:52:40 WARNING[753677]: pbx.c:1836
ast_pbx_run: Timeout, but no rule 't' in context
'ip2pri'
> Aug  6 11:52:40 DEBUG[81926]: chan_h323.c:1179
cleanup_connection: Cleaning up our mess
> 
> 
> My configs are:
> 
> h323.conf:
> 
> [general]
> port = 1720
> bindaddr = 0.0.0.0
> disallow=all
> allow=g729
> gatekeeper = DISABLE
> context=ip2pri
> [ip2pri] ; is this needed?
> type=user
> context=ip2pri
> 
> extensions.conf:
> 
> [general]
> static=yes
> writeprotect=yes
> [globals]
> 
> [ip2pri]
> exten => _9.,1,Dial(Zap/1/${EXTEN:0}) ; i must
send the 9 to the PRI...
> [default]
> 
> zapata.conf:
> 
> [channels]
> context=pri2ip
> switchtype=euroisdn
> signalling=pri_net  ; pri_net is ok
> group=1
> channel => 1-15,17-31
> 
> 
> Some help?
> 
> Thanks,
> 					HoraPe
> ---
> Horacio J. Peña
> horape at compendium.com.ar
> horape at uninet.edu
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
http://lists.digium.com/mailman/listinfo/asterisk-users