[Asterisk-Users] CAC AB1 and Asterisk

[Tim McKee]

Agreed, I'm using an AB2 with no problems at all.  Can't speak for AB1.  It
is probably signalling though.

Here is my config for an AB2:

/etc/zaptel.conf

# span 3 is for channel bank (24 FXS)
span=3,0,0,d4,ami
fxoks=49-72

/etc/asterisk/zapata.conf

[channels]
use_callerid=yes
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
;echotraining=yes
echotraining=800
relaxdtmf=no
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
amaflags=billing
accountcode=sdnclt
;
; Default language
;
language=en
.
.
.
context=dialnational
;
signalling=fxo_ks
use_callerid=yes
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
relaxdtmf=no
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
amaflags=billing
accountcode=sdnclt


callwaiting=yes
;
callerid=SDN ssssssss <xxx>
channel => 49
; 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steven
Critchfield
Sent: Wednesday, August 04, 2004 17:10
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] CAC AB1 and Asterisk

On Wed, 2004-08-04 at 15:26, Ronan wrote:
> Any ideas on this?

Have patience is the first idea. 

While there is a large subscriber base, there isn't a large base of
knowledgable users with that hardware. You haven't let enough time pass to
be sure people with the knowledge have seen it. 

I would suspect that you have a signalling problem. Configs would have to be
shared for that to be diagnosed though.

> On Wed, 2004-08-04 at 01:06, Ronan wrote:
> > Hi all,
> > 
> >         Don't know if anyone can help me.  We just set up a CAC 
> > Access Bank 1 with Asterisk.  Everything works great except, when we 
> > ring a Zap interface, the analog phone does not actually ring.  The 
> > light blinks, and if you answer it you are connected to the person, 
> > but the actual phone does not ring.
> > 
> >         Using the "Test" option for the channel does make the phone 
> > ring, but not during an actual call.
> > 
> >         Has anyone had this prob before.  I saw something about it 
> > on a list from back in 2002, but no answer.  :(
> > 
> >         Any help would be appreciated.
> > 
> > Thanks,
> > 
> > -Ronan
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
--
Steven Critchfield <critch at basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users