[Asterisk-Users] Problems with E100P

[Marcelo Rodriguez]

Hi,
   I'm having trouble configuring and E1 link , I know the E1 is a PRI
and the switchtype is 5ess. The problem is that everytime I try to dial
I got and error saying that it was unable to open the zap channel .
Devices are created in the /dev/zap directory and I can open them with a
cat /dev/zap/1. I can also see the channels in /proc/zaptel/1.
			
	Thanks in advance

[zaptel.conf]
span=1,1,0,cas,ami
bchan=1-15,17-31
dchan=16
loadzone = us
defaultzone=us

[zapata.conf]
trunkgroup => 1,16
spanmap => 1,1
[channels]
switchtype=5ess
context = default
signalling = pri_cpe
group = 1
channel => 1-15,17-31

cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" AMI/ RED
 
           1 WCT1/0/1 Clear
           2 WCT1/0/2 Clear
           3 WCT1/0/3 Clear
           4 WCT1/0/4 Clear
           5 WCT1/0/5 Clear
           6 WCT1/0/6 Clear
           7 WCT1/0/7 Clear
           8 WCT1/0/8 Clear
           9 WCT1/0/9 Clear
          10 WCT1/0/10 Clear
          11 WCT1/0/11 Clear
          12 WCT1/0/12 Clear
          13 WCT1/0/13 Clear
          14 WCT1/0/14 Clear
          15 WCT1/0/15 Clear
          16 WCT1/0/16 HDLCFCS
          17 WCT1/0/17 Clear
          18 WCT1/0/18 Clear
          19 WCT1/0/19 Clear
          20 WCT1/0/20 Clear
          21 WCT1/0/21 Clear
          22 WCT1/0/22 Clear
          23 WCT1/0/23 Clear
          24 WCT1/0/24 Clear
          25 WCT1/0/25 Clear
          26 WCT1/0/26 Clear
          27 WCT1/0/27 Clear
          28 WCT1/0/28 Clear
          29 WCT1/0/29 Clear
          30 WCT1/0/30 Clear
          31 WCT1/0/31 Clear