[Asterisk-Users] Zaptel doesn't see remote hangup ? euro-isdn

[Sergio Serrano]

Hi,
 in Spain that process is correct. If you setup a communication between
a caller and a called, if called phone hangs, in caller side hear a
silence, but is a correct process. It's is due to in the called side you
can hangup a phone and pickup other phone without lost communication.


Regards,
srsergio

-----Mensaje original-----
De: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] En nombre de Walter Klomp
Enviado el: jueves, 29 de julio de 2004 16:44
Para: asterisk-users at lists.digium.com
Asunto: [Asterisk-Users] Zaptel doesn't see remote hangup ? euro-isdn


Hi

Just received my spanky new TE405P today to replace my Cisco gateway...

After much fiddling (I forgot to switch it to E1) I got it to work and 
everything "seems" to work perfectly on our ISDN PRI.

If I dial-in from the PSTN to a SIP phone, the call goes through and if
I 
hangup either the SIP phone or the remote end, the call gets
disconnected 
and destroyed

However, if I dial-in from the SIP phone to my PSTN and then hang up my
PSTN 
phone, the call does not get disconnected. My SIP phone goes quiet but 
doesn't disconnect. If I a few seconds later pick up the PSTN phone
again, 
the connection is still there. Only if I hangup the SIP phone, the call
gets 
destroyed. It seems that Zap doesn't see the remote hangup...

Here is my Zaptel config and my Zapata config. I presume the extensions 
config etc are OK as my call-flow never changed and things were working
fine 
with my AS5300.

Am I missing something ?  How do I debug the Zap channels ?

Cheers,
Walter Klomp

/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4 # This is the line in question...
span=2,1,0,ccs,hdb3,crc4 # not used yet span=3,0,0,ccs,hdb3,crc4 # not
used yet span=4,0,0,ccs,hdb3,crc4 # not used yet # Span 1 bchan=1-15
dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3
bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109
bchan=110-124

alaw=1-124

loadzone=uk
defaultzone=uk

/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=euroisdn
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
rxgain=0.0
txgain=0.0
immediate=no
; Channels inherit configuration above them
; Span 1
group=1
signalling=pri_cpe
channel => 1-15
channel => 17-31

; Span 2
group=2
signalling=pri_cpe
channel => 32-46
channel => 48-62

; Span 3
group=3
signalling=pri_cpe
channel => 63-77
channel => 79-93

; Span 4
group=4
signalling=pri_cpe
channel => 94-108
channel => 110-124

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users