[Asterisk-Users] Extra digit needed for outbound call

[Steven Critchfield]

On Wed, 2004-04-28 at 14:49, Lisa Xie wrote:
> Hi,
> 
> I've been working on starting a lab of end to end asterisk system and
> now most of pieces seem to be working. The two asterisk servers are
> connected by T1. Both servers have a couple of SIP phones connected and
> one of the servers has a FXS card with an analog phone hanging. 
> 
> I can make calls across the T1 link however there is one thing that I
> don't understand. I need to append one extra digit to get the correct
> extension number at the other end. For example, when I tried to call
> extension 2000 at the other end, I need to dial "92000x", where x can be
> anything between 0-9. Otherwise, if I dial "92000", the console says
> something like "extension 200 is not found". 
> 
> Also internal calls are normal. 
> 
> This looks very bizarre for me... How can I fix it?

Examine your dialplan. Post it here and maybe someone will point out
what you are doing wrong.
-- 
Steven Critchfield  <critch at basesys.com>