[Asterisk-Users] Intel 537ep

[Jeremy Hall]

Juan,

Let me clarify.  By "drop in replacement," I did not mean it is exactly the same card.  What I meant, was when installing the card, use the same process as you do with the X100P.  The directions are the same, regardless of which card you use.  That was a poor choice in words without the further explanation.  I apologize for what ever inconvenience this may have caused.

I have no doubt that the X100P is a higher quality card.  I mean $100 vs. $3 has to come from somewhere.  For all I know, my caller ID issue could be heat related, and that is why your card has a heatsink.  I haven't done enough troubleshooting to determine that yet.  But obviously from the repeated questions, there is interest in using this card so I am going to continue to do what I can to help those people out.

Regards,

Jeremy

-----Original Message-----
From: Juan J. Sierralta P. [mailto:juanjo at atmlab.utfsm.cl] 
Sent: Monday, April 26, 2004 11:01 AM
To: Asterisk Users
Subject: Re: [Asterisk-Users] Intel 537ep

On Tue, 2004-04-27 at 09:57, Jeremy McNamara wrote:
> Jeremy Hall wrote:
> 
> >The 537 is, for the most part, a drop-in replacement for the Digium card. 
> >

	The i537EP isn´t a replacement, in fact the i537EP is a complete
different chipset just check the Intel developers site. AFAIR the i537UP
is the replacement the only difference I noted is the PCI chip since
Digium uses TigerJet chips and this modems uses MD3200, anyway I cannot
check since my X101P has a heat sink on top.

	BTW, checking the Silabs pages which is the chip manufacter of the AFE
and DAA I noted that Si3012 is only FCC certified, are there problems
for people using european specs on the X101P ?


-- 
Juanjo sin .sig

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users