[Asterisk-Users] Polycom registration

[John Baker]

Try following the instructions at

http://www.voip-info.org/wiki-Polycom+Phones

I think you don't have your MACADDRESS.cfg file set right.  I've never 
used the web interface.

If it still doesn't work after that, write back.

John

P.S.  Make sure you use a good xml editor when fixing up the cfg files.


Olle E. Johansson wrote:

> Roger wrote:
> 
>> I have a PolyCom Soundpoint 500 sip phone.  I'm tring to get the phone 
>> registered on an asterisk box but am having no luck.  I get the 
>> following errors  192.168.22.196 being the phone and 22.254 being the 
>> asterisk box..
>>
>> Apr 23 11:41:33 NOTICE[1133742896]: chan_sip.c:5623 handle_request: 
>> Registration from '"110" <sip:192.168.22.196 at 192.168.22.254>' failed 
>> for '192.168.22.196'
> 
> THe SIP uri looks strange. Please include a full SIP debug of a 
> registration
> attempt.
> 
> /O
> 
>> Apr 23 11:42:05 NOTICE[1133742896]: chan_sip.c:5623 handle_request: 
>> Registration from '"110" <sip:192.168.22.196 at 192.168.22.254>' failed 
>> for '192.168.22.196'
>> Apr 23 11:42:05 NOTICE[1133742896]: chan_sip.c:5623 handle_request: 
>> Registration from '"110" <sip:192.168.22.196 at 192.168.22.254>' failed 
>> for '192.168.22.196'
>> Apr 23 11:42:37 NOTICE[1133742896]: chan_sip.c:5623 handle_request: 
>> Registration from '"110" <sip:192.168.22.196 at 192.168.22.254>' failed 
>> for '192.168.22.196'
>>
>> Attempting to dial out from the Polycom Phones gives a fast busy..  
>> Below I've included my sip.conf file - I'm wanting to set phone as x110.
>>
>> [110]               type=friend
>> username=110
>> secret=test
>> host=dynamic
>> context=home
>> callgroup=1
>> pickupgroup=1
>> canreinvite=yes
>> dtmfmode=rfc2833
>> ;dtmfmode=inband
>> ;mailbox=110 at pstn                ; put in for voicemail notification
>> callerid="Polycom" <110>         ; put in for internal caller id only
>>
>> I've reset the phone to factory defaults and started from scratch but 
>> still - no dice when it comes to registering this puppy.  I used the 
>> web interface to specify the username/password but still nothing.
>> Any ideas or docs I could look at to get this Polycom phone setup?
>>
> 
>