[Asterisk-Users] Problems with ADIT600 and T100P

[Darren Nickerson]

Jamie,

Your zapata.conf looks right, but I don't see:

fxsks=1-24

in your zapata.conf. If you add that do things improve?

ztcfg -vv should give you something like:

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
Channel 09: FXS Kewlstart (Default) (Slaves: 09)
Channel 10: FXS Kewlstart (Default) (Slaves: 10)
Channel 11: FXS Kewlstart (Default) (Slaves: 11)
Channel 12: FXS Kewlstart (Default) (Slaves: 12)
Channel 13: FXS Kewlstart (Default) (Slaves: 13)
Channel 14: FXS Kewlstart (Default) (Slaves: 14)
Channel 15: FXS Kewlstart (Default) (Slaves: 15)
Channel 16: FXS Kewlstart (Default) (Slaves: 16)
Channel 17: FXS Kewlstart (Default) (Slaves: 17)
Channel 18: FXS Kewlstart (Default) (Slaves: 18)
Channel 19: FXS Kewlstart (Default) (Slaves: 19)
Channel 20: FXS Kewlstart (Default) (Slaves: 20)
Channel 21: FXS Kewlstart (Default) (Slaves: 21)
Channel 22: FXS Kewlstart (Default) (Slaves: 22)
Channel 23: FXS Kewlstart (Default) (Slaves: 23)
Channel 24: FXS Kewlstart (Default) (Slaves: 24)

Also, it's not clear to me where your master clock is ... you say you have
set the adit to get it from the T1 (instead of its internal oscillator), but
it does not look like you have told asterisk to provide clocking on that T1.
I may be reading that wrong ....

-Darren

----- Original Message ----- 
From: Ferrara, Jamie
To: asterisk-users at lists.digium.com
Sent: Thursday, April 22, 2004 9:09 PM
Subject: [Asterisk-Users] Problems with ADIT600 and T100P


I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO 8
port cards in the ADIT and a T1 controller card. I have a T1 x-over cable
connecting two together. Here are copies of the relevant bits of my
zaptel.conf and Zapata.conf

Zaptel.conf
span=1,0,0,esf,b8zs
loadzone=us
defaultzone=us

Zapata.cfg
context=default
signalling=fxs_ks
group=1
channel => 1-24

My problem is that I keep getting a framing error on the ADIT or "LOF". I
have the ADIT set to ESF and B8ZS and it is also set to clock to the T1. Can
anyone give me a hand?


TIA,
Jamie Ferrara