[Asterisk-Users] Ok, Im confused

[tmpm]

Its that now, its the machine facing my 4mb cablemodem...thanks..

At 01:54 4/22/2004, you wrote:
>The simple answer probably is, If you have a NAT firewall (like a linksys,
>netgear, dlink, etc) it will not work.
>
>If your linux machine is directly connected follow the instructions on the
>wiki and it will work no problems.  I could not get FWD to work at all until
>I made my linux box  the outside edge of my network.
>
>Scott
>----- Original Message -----
>From: "James H. Thompson" <jht at lj.net>
>To: <asterisk-users at lists.digium.com>
>Sent: Wednesday, April 21, 2004 8:58 PM
>Subject: Re: [Asterisk-Users] Ok, Im confused
>
>
> > You can post your .conf files.
> >
> > But here is a guess at what you may need
> > replace "FWD##"  with your freeworlddialup number and "mypassword" with
>your freeworlddialup
> > password.
> >
> > in sip.conf
> >
> > context = from-fwd
> > register=FWD##:mypassword at fwd.pulver.com/FWD##
> >
> > [fwd]
> > type=friend
> > secret=mypassword
> > username=FWD##
> > host=fwd.pulver.com
> >
> > in phone.conf
> > ...
> > context=from-phone
> > ...
> >
> > in extensions.conf
> >
> > [from-fwd]
> > exten => FWD##,1,Dial(Phone/phone0)
> > exten => i,2,Playback(invalid)
> >
> > [from-phone]
> > exten => _.,1,SetCallerID(FWD##)
> > exten => _.,2,SetCIDName(FWD##)
> > exten => _.,3,Dial(SIP/${EXTEN:1}@fwd)
> > exten => _.,4,Playback(invalid)
> > exten => _.,5,Hangup
> >
> >
> >
> >
> >
> > Jim
> >
> > James H. Thompson
> > jht at lava.net
> >
> > ----- Original Message -----
> > From: "tmpm" <tmpm at softhome.net>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Wednesday, April 21, 2004 1:24 PM
> > Subject: Re: [Asterisk-Users] Ok, Im confused
> >
> >
> > > Thanks Jim,
> > > But that page started my trip off to confusion....been there....tried it
>10
> > > different ways...still no joy.
> > > I'll go through it once again, maybe Im missing something, I dont know.
>Im
> > > about ready to boot the penguin to the curb...
> > > I know its in there...I think Ive got it all configured, and I dial the
> > > outbound strings, and get a fast busy...I know one stinking letter off,
>and
> > > its whacked...
> > > HOW for example do I specify my one and only extension is the Internet
> > > phone jack? Phone0?
> > > Somehow theres got to be a tie-in...I cant find it.
> > > been thru extensions.conf, phones.conf, sip.conf..etc.
> > > groan..
> > >
> > > At 18:40 4/21/2004, you wrote:
> > > >Look here:
> > > >     http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD
> > > >
> > > >Jim
> > > >
> > > >James H. Thompson
> > > >jht at lava.net
> > > >
> > > >----- Original Message -----
> > > >From: "tmpm" <tmpm at softhome.net>
> > > >To: <asterisk-users at lists.digium.com>
> > > >Sent: Wednesday, April 21, 2004 11:50 AM
> > > >Subject: [Asterisk-Users] Ok, Im confused
> > > >
> > > >
> > > > > Im totally a newbee at *
> > > > >
> > > > > Im confused.
> > > > > Ive got a FWD account, and it works on the winboxen. Ive got * up
>and can
> > > > > do the echotest etc, so its working.
> > > > >
> > > > > I want to get FWD working, and all the pages ive seen on setup are
>most
> > > > > confusing.
> > > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same
>places as
> > > > > the IAXTEL stuff?
> > > > > Ive been trying for a week now, and Im more lost than before.
> > > > >
> > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I
> > > > want to
> > > > > do at this point is make and receive calls thru FWD using that
>jack....Ill
> > > > > plug the house in later...Ill learn the other stuff later. No
> > > > voicemail, no
> > > > > BS, no dial thru least cost routing, or nightlines.... just make it
> > > > work as
> > > > > a phone.
> > > > >
> > > > > Im either more stupid than I think, or Im missing something major
>here.
> > > > >
> > > > > Ive got to the point the CLI shows me connected to FWD fine.(I
>think)
> > > > > Sip show users
> > > > >
> > > > > Username Secret Authen Def. Context a/c
> > > > > fwd.pulver.com secret md5,plaintext default no
> > > > >
> > > > > Need some basic, stupidly simple scripts here...I dont need or want
>to
> > > > dial
> > > > > 1-700 or *9 or any other crap, just make it work like the stupid
>winbox
> > > > > phone for now...Ill read the wiki for a couple years, and then maybe
>I can
> > > > > do voicemail or whatever...
> > > > >
> > > > > frustrated...and I know its showing...sri
> > > > >
> > > > > _______________________________________________
> > > > > Asterisk-Users mailing list
> > > > > Asterisk-Users at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > > To UNSUBSCRIBE or update options visit:
> > > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > > >
> > > >_______________________________________________
> > > >Asterisk-Users mailing list
> > > >Asterisk-Users at lists.digium.com
> > > >http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users