[Asterisk-Users] TxFax/SpanDSP problems

[Eric Wieling]

I'm getting the following when sending to a specific fax machine.  Any
ideas?

File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif'
Changed from phase 0 to 2
Slow carrier up
Slow carrier down
Slow carrier up
<<< NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56
49 4e 47 54 00 67 00 80 80 80 0c 01 02
NSF without final frame tag
The remote is made by 'Canon'
<<< DIS: 80 20 ee 88 c4 80 95 80 80 80 38
DIS with final frame tag
In state 10
DIS:
V.8 capable
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter, V.29 and V.17
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm) and B4 (364mm)
Receiver's minimum scan line time: 20ms at 3.85 l/mm: T7.7 = T3.85
Error correction mode
T.6 coding
R8x15.4lines/mm OK
R16x15.4lines/mm and/or 400x400pels/25.4 mm OK
Metric-based resolution preferred
Minimum scan line time for higher resolutions: T15.4 = T7.7
North American Letter (215.9mm x 279.4mm)
North American Legal (215.9mm x 355.6mm)
Single-progression sequential coding (Rec. T.85) basic
DCS:
Selected data signalling rate: V.29, 9600bps
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 20ms
Start sending document
Start tx document - compression 2
Fine mode
Changed from phase 2 to 4
Sending ident
>>> TSI: 43 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>>> DCS: 83 00 c4 00
HDLC underflow in state 3
Changed from phase 4 to 6
Changed from phase 6 to 3
Slow carrier up
<<< XCN: fa
XCN with final frame tag
In state 4
Disconnecting
Changed from phase 3 to 7
Changed from phase 7 to 8

-- 
          Eric Wieling * BTEL Consulting * 504-899-1387 x2111
"In a related story, the IRS has recently ruled that the cost of Windows
upgrades can NOT be deducted as a gambling loss."