[Asterisk-Users] T100P + Zap Errors

[Sean Bruton]

On Wed, Apr 21, 2004 at 08:37:12AM -0600, Michael Welter wrote:
> 
> Sean Bruton wrote:
> >I am having some difficulty getting a T100P card to work with my PRI.
> >When I attempt to make an outbound call via:
> >
> >exten => 1004,1,Dial(Zap/g1/NPANXXXXXX)
> 
> There is a real number here,  ^^^^^^^^^^  right?

of course :) a la 2125551212

> >
> >I see the following on the asterisk console:
> >
> >-- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack
> >Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create 
> >channel of type 'Zap'
> >== Everyone is busy at this time
> >
> >both the zaptel and wct1xxp modules are loaded and ztcfg reports no
> >errors:
> >
> ># ztcfg -v
> >
> >Zaptel Configuration
> >======================
> >
> >SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> >
> >24 channels configured.
> >
> >and dmesg looks fine too:
> >
> >Zapata Telephony Interface Registered on major 196
> >Framer: DS21552, Revision: 3 (T1)
> >Found a Wildcard: Digium Wildcard T100P T1/PRI
> >Registered tone zone 0 (United States / North America)
> >Using ESF/B8ZS coding/framing
> >Calling startup (flags is 4099)
> >
> >my zaptel.conf looks like:
> >
> >span=1,0,0,esf,b8zs
> 
> Set this ^ zero to 1 so the card will recover timing from the T1 stream.
> 
> >bchan=1-23
> >dchan=24
> >loadzone=us
> >defaultzone=us
> >
> >and zapata.conf contains:
> >
> >[channels]
> >context=default
> >echocancel=yes
> >echocancelwhenbridged=yes
> >echotraining=yes
> >rxgain=0.0
> >txgain=0.0
> >group=1
> >switchtype=national
> >signalling=pri_cpe
> >group=1
> >channel=>1-23
> >
> >Any suggestions are greatly appreciated.
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>