[Asterisk-Users] T100P + Zap Errors

[Sean Bruton]

I am having some difficulty getting a T100P card to work with my PRI.
When I attempt to make an outbound call via:

exten => 1004,1,Dial(Zap/g1/NPANXXXXXX)

I see the following on the asterisk console:

-- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack
Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy at this time

both the zaptel and wct1xxp modules are loaded and ztcfg reports no
errors:

# ztcfg -v

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

24 channels configured.

and dmesg looks fine too:

Zapata Telephony Interface Registered on major 196
Framer: DS21552, Revision: 3 (T1)
Found a Wildcard: Digium Wildcard T100P T1/PRI
Registered tone zone 0 (United States / North America)
Using ESF/B8ZS coding/framing
Calling startup (flags is 4099)

my zaptel.conf looks like:

span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us

and zapata.conf contains:

[channels]
context=default
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
switchtype=national
signalling=pri_cpe
group=1
channel=>1-23

Any suggestions are greatly appreciated.

-- 
Sean Bruton
Senior Engineer
NeoSpire, Inc.