[Asterisk-Users] zaphfc

[Paulo Loureiro]

Hello list,

I'm trying to use zaphfc, the module loads ok, and it identifies the hfc
boards in the machine.
The problem is: whenever i try to ztcfg -vv I get the following:

8x------------------- 
Zaptel Configuration
======================
 
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
 
Channel map:
 
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
 
3 channels configured.
 
ZT_SPANCONFIG failed on span 1: Invalid argument (22)

8x------------------------------

when I try to start * it bails out with:


>  == Parsing '/etc/asterisk/zapata.conf': Found
> Apr 19 17:27:34 WARNING[16384]: chan_zap.c:671 zt_open: Unable to specify channel 1: No such device or address
> Apr 19 17:27:34 ERROR[16384]: chan_zap.c:5338 mkintf: Unable to open channel 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
> Apr 19 17:27:34 ERROR[16384]: chan_zap.c:7490 setup_zap: Unable to register channel '1'
> Apr 19 17:27:34 WARNING[16384]: loader.c:313 ast_load_resource: chan_zap.so: load_module failed, returning -1
>   == Unregistered channel type 'Tor'
>   == Unregistered channel type 'Zap'
>     -- Unregistered channel 1
> Apr 19 17:27:34 WARNING[16384]: loader.c:408 load_modules: Loading module chan_zap.so failed!
> Junk at the beginning 49443303
> 



Can anyone out there using zaphfc, help me on this?

Thanks in advance,


--- Paulo Loureiro.