[Asterisk-Users] x100p config

Sun Apr 18 14:26:01 MST 2004

On Sunday 18 Apr 2004 9:29 pm, Paul Tyreman wrote:
> I don't have any wait commands in my s extention.
>
> I don't use (or need to use since they don't work in the UK) caller display
> on external calls, but I do want to keep it on intenal calls, so is there
> any way to turn it off on exernal calls only ?
>
> One more point, I rebooted my server and when I tried to resart Asterisk
> again, I got an error saying something about no card on d0001 (or something
> similar) and it refused to start.  I had to run "modprobe wcfxo" before I
> could start the server.  Is that normal, or is there something I can do so
> it automaticly decects the card when I turn the server on.
>
> Thanks again for yor help Sean.
>
> Paul.
>
>

Hi,

I've been messing around today with * and noticed the delay in ringing too. As 
a previous reply mentioned it is something to do with CallerID. In your 
zapata.conf file, add 

usecallerid=no

to the channel relating to your x100 card. This will turn off the detection of 
callerID on your incoming line, which won't work in the UK with X100p cards. 
I've just chaned my zapata.conf file and there is only a single ring of 
waiting now.

On a related note, if you want caller ID, I've managed to get it working using 
a modem and I've documented it at:

http://www.flapper.net/modules.php?name=Sections&op=viewarticle&artid=1

How do you add to the wiki? There's little or no information that I can find 
regarding the often asked question of UK CID.

Cheers,

Darren.

>
>
>
>
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Sean Cheesman
> Posted At: 18 April 2004 20:41
> Posted To: Asterisk-Users
> Conversation: [Asterisk-Users] x100p config
> Subject: RE: [Asterisk-Users] x100p config
>
>
> It could be one of several things.  The two things that come to mind is
> Caller ID and a Wait() statement in your dialplan.  Since the Caller ID
> information is transmitted between the first and second ring, Asterisk has
> to wait for it if Caller ID is enabled.  Other than that, is there a Wait()
> line in your S extension?
>
> Sean
> -----Original Message-----
> From: Paul Tyreman [mailto:paul at tyreman.org.uk]
> Sent: Sunday, April 18, 2004 2:31 PM
> To: Asterisk-Users at lists.digium.com
> Subject: RE: [Asterisk-Users] x100p config
>
>
> Thanks for your help.  I've got it working now.
>
> Only one problem.  When users from the public network call my server, they
> hear three rings before the phones on my server start ringing.  Is that
> usual, or is it a setting that can be changed ?
>
> Thanks, Paul.
>
>
>
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Sean Cheesman
> Posted At: 18 April 2004 19:48 Posted To: Asterisk-Users Subject: RE:
> [Asterisk-Users] x100p config
>
>
> Welcome to the wonderful world of Asterisk!  In the future, you might want
> to make sure that you post in plain text mode instead of HTML. There are
> quite a few people here who are great assets that won't even read if you
> post in HTML.
>
> Your problem has to do with the contexts.  In your zapata.conf file, you
> will see reference to a context for your X100P.  That is the context into
> which calls on that card will be dumped.  If you check your
> extensions.conf, you should find a matching context that will have all of
> the demo stuff in it.  You can either change the demo context to meet your
> needs, or change your zapata.conf to point to a more useful context that
> has just what you want in it.
>
> You might want to read over the info at http://www.voip-info.org. There's a
> lot of good reading there that will help you make the most of Asterisk.
>
> Sean
>
> -----Original Message-----
> From: Paul Tyreman [mailto:paul at tyreman.org.uk]
> Sent: Sunday, April 18, 2004 1:31 PM
> To: Asterisk-Users at lists.digium.com
> Subject: [Asterisk-Users] x100p config
>
>
> Hi,
>
> I have just installed my first X100P card, and seams to be half working.
>
> You can call the public telephone number which the card is attached to and
> hear some lady telling you about asterisk.  If I dial the extention number
> of the phone I want to call, it connects and it's all good.
>
> However, I have put this line in my extensions.conf:
> [incoming]
> exten => s,1,Dial(SIP/Phone1&SIP/Phone2,20,tr)
>
> So it should ring phone one and phone two rather then give that that girls
> voice !  Can anyone tell me what I'm doing wrong ?
>
>
> Also, I have put this in the same extensions.conf file: [outgoing] exten =>
> _0X.,1,Dial,Zap/1/${EXTEN:1}
>
> [sip]
> include => outgoing
>
> Yet I still cannot make outgoing calls, when I dial 0 and the number I want
> to call on the public network.
>
> Any help would be great as I'm starting to pull my hair out !
>
> Thanks, Paul.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or
> update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or
> update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Darren Poulson - Unix Admin
PGP Key at: http://www.22balmoralroad.net/~daz/pgp.key
What passes for woman's intuition is often nothing more than man's
transparency.
		-- George Nathan