[Asterisk-Users] x100p config

[William J Mandra]

Paul,
   I just added the modprobe commands to my /etc/rc.local file to load the
wc cards.

   Bill
  -----Original Message-----
  From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Paul Tyreman
  Sent: Sunday, April 18, 2004 ONYX 4:30 PM
  To: Asterisk-Users at lists.digium.com
  Subject: RE: [Asterisk-Users] x100p config


  I don't have any wait commands in my s extention.

  I don't use (or need to use since they don't work in the UK) caller
display on external calls, but I do want to keep it on intenal calls, so is
there any way to turn it off on exernal calls only ?

  One more point, I rebooted my server and when I tried to resart Asterisk
again, I got an error saying something about no card on d0001 (or something
similar) and it refused to start.  I had to run "modprobe wcfxo" before I
could start the server.  Is that normal, or is there something I can do so
it automaticly decects the card when I turn the server on.

  Thanks again for yor help Sean.

  Paul.






  -----Original Message-----
  From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Sean Cheesman
  Posted At: 18 April 2004 20:41
  Posted To: Asterisk-Users
  Conversation: [Asterisk-Users] x100p config
  Subject: RE: [Asterisk-Users] x100p config


  It could be one of several things.  The two things that come to mind is
Caller ID and a Wait() statement in your dialplan.  Since the Caller ID
information is transmitted between the first and second ring, Asterisk has
to wait for it if Caller ID is enabled.  Other than that, is there a
  Wait() line in your S extension?

  Sean
  -----Original Message-----
  From: Paul Tyreman [mailto:paul at tyreman.org.uk]
  Sent: Sunday, April 18, 2004 2:31 PM
  To: Asterisk-Users at lists.digium.com
  Subject: RE: [Asterisk-Users] x100p config


  Thanks for your help.  I've got it working now.

  Only one problem.  When users from the public network call my server, they
hear three rings before the phones on my server start ringing.  Is that
usual, or is it a setting that can be changed ?

  Thanks, Paul.



  -----Original Message-----
  From: asterisk-users-admin at lists.digium.com
  [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Sean Cheesman
Posted At: 18 April 2004 19:48 Posted To: Asterisk-Users
  Subject: RE: [Asterisk-Users] x100p config


  Welcome to the wonderful world of Asterisk!  In the future, you might want
to make sure that you post in plain text mode instead of HTML. There are
quite a few people here who are great assets that won't even read if you
post in HTML.

  Your problem has to do with the contexts.  In your zapata.conf file, you
will see reference to a context for your X100P.  That is the context into
which calls on that card will be dumped.  If you check your extensions.conf,
you should find a matching context that will have all of the demo stuff in
it.  You can either change the demo context to meet your needs, or change
your zapata.conf to point to a more useful context that has just what you
want in it.

  You might want to read over the info at http://www.voip-info.org. There's
a lot of good reading there that will help you make the most of Asterisk.

  Sean

  -----Original Message-----
  From: Paul Tyreman [mailto:paul at tyreman.org.uk]
  Sent: Sunday, April 18, 2004 1:31 PM
  To: Asterisk-Users at lists.digium.com
  Subject: [Asterisk-Users] x100p config


  Hi,

  I have just installed my first X100P card, and seams to be half working.

  You can call the public telephone number which the card is attached to and
hear some lady telling you about asterisk.  If I dial the extention number
of the phone I want to call, it connects and it's all good.

  However, I have put this line in my extensions.conf:
  [incoming]
  exten => s,1,Dial(SIP/Phone1&SIP/Phone2,20,tr)

  So it should ring phone one and phone two rather then give that that girls
voice !  Can anyone tell me what I'm doing wrong ?


  Also, I have put this in the same extensions.conf file: [outgoing] exten
=> _0X.,1,Dial,Zap/1/${EXTEN:1}

  [sip]
  include => outgoing

  Yet I still cannot make outgoing calls, when I dial 0 and the number I
want to call on the public network.

  Any help would be great as I'm starting to pull my hair out !

  Thanks, Paul.
  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040418/2ec671ba/attachment.htm