[Asterisk-Users] Intel 536ep as a FXO?

[Marcin Mazurek]

Hi,

I've seen some reports about ruuning Intel modem with 537 or MD3200
chipset running with Zaptel drivers as a FXO port. Did anybody managed
to set up a PCI faxmodem based on Intel536ep chipset to work with * and
Zaptel drivers?
Modem seemd to work just fine with Linux, but the driver says no;)

some more info:

Linux 2.4.26

mazuchna:~# cat /proc/pci | grep 536
    Communication controller: Intel Corp. 536EP Data Fax Modem (rev 0).

mazuchna:~# lsmod
Module                  Size  Used by    Tainted: P
ztdynamic               6692   0  (unused)
zaptel                177280   0  [ztdynamic]
Intel536              876524   0  (unused)

mazuchna:/lib/modules/2.4.26/misc# insmod wcfxo
Using /lib/modules/2.4.26/misc/wcfxo.o
/lib/modules/2.4.26/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg

is there anything more I can do?
tia
mazek

-- 
http://mazek.netsync.pl/    :::     nic-hdl: MM3380-RIPE
GnuPG 6687 E661 98B0 AEE6 DA8B  7F48 AEE4 776F 5688 DC89