[Asterisk-Users] SwissVoice IP10S not able to dial calls

[Philipp von Klitzing]

Hi!

> I have set up a new SwissVoice phone and it can receive calls but I
> cannot make calls out from it.  The setup is simple for now, 2 phones:
> SwissVoice is ext 7726 and Cisco 7960 (SIP) is ext 7999. 

Which verasion of Asterisk are you using? 

Please do check the known MGCP bugs, especially 881:
http://bugs.digium.com/bug_view_page.php?bug_id=0000881

Also don't forget to provide info about your ip10 firmware version.

Finally: Did you put the ip10 into the right context so that it actually 
has the required access rights to dial 7999? 

Cheers, Philipp


> I can call from the Cisco phone and it rings on the SwissVoice phone but
> when I dial from the SwissVoice phone I get a busy tone upon dialing the
> second digit.  The log reads as follows:
> 
>     -- Endpoint 'aaln/1 at 10.1.24.112-1' observed 'hd'
>     -- MGCP mgcp_new(MGCP/aaln/1 at 10.1.24.112-1) created in state: Down
>     -- Endpoint 'aaln/1 at 10.1.24.112-1' observed '7'
>     -- Endpoint 'aaln/1 at 10.1.24.112-1' observed '9'
>     -- Endpoint 'aaln/1 at 10.1.24.112-1' observed 'hu'
>     -- MGCP handle_request(aaln/1 at 10.1.24.112-1) ast_channel already
> destroyed
>     -- MGCP handle_request(aaln/1 at 10.1.24.112) set vmwi(-)
> 
> Here are my configuration files:
> 
> MGCP.conf
> ===========
> [10.1.24.112]
> context=local
> host=10.1.24.112
> callerid = "Brad Chilton <7726>"
> callgroup=0,2-5
> canreinvite=no
> pickupgroup=0,1
> nat=no
> threewaycalling=yes
> transfer=yes     ; transfer requires threewaycalling=yes. Use FLASH to
> transfer
> ;callwaiting=yes  ; this might be a cause of trouble for ip10s
> ;cancallforward=yes
> line => aaln/1
> 
> EXTENSIONS.conf
> ===============
> exten => 7726,1,Dial(MGCP/aaln/1 at 10.1.24.112,20,tr)
> _______________________________________________