[Asterisk-Users] FXS => FXO Converter Problem

[Erick Weber V.]

Andrew

Thanks for your answer

I'll test this conf an I'll post it so you know if it works

Thanks 

Erick
----- Original Message ----- 
From: "Andrew Thompson" <asteriskuser at aktzero.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, April 13, 2004 12:48 PM
Subject: RE: [Asterisk-Users] FXS => FXO Converter Problem


> Erick Weber V. wrote:
> > Hello:
> > 
> > I have a ATA 186 and a FXS => FXO converter so I will like to program
> > a extension  that can be dialed and it will dial the ATA extention #,
> > wait for dial tone and then dial the phone number.  
> 
> Unfortunately I don't believe there is a concept of "wait for dial tone."
> 
> You'll just need to test it, and see how long it takes to do the answer,
> pickup, get dialtone. Time it a few times, then add a second or so onto
> that. 
> 
> I tried to write up an example of what you should put into your
> extensions.conf, but It's a little over my head in this case. My thoughts
> are:
> 
>  exten => _91NXXXXXXXXX,1,Dial(sip/yourata)
>  exten => _91NXXXXXXXXX,1,SendDigits(${EXTEN:1})
> 
> NOTE: I've not tested this...
> 
> -----
> Andrew Thompson
> http://aktzero.com/ 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>