[Asterisk-Users] Booting error - Unable to specify channel 2: No such device

[Todd Lieberman]

do a cat /proc/interupts

your should see your hardware showup.

TL

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Anon
Sent: Sunday, April 11, 2004 8:47 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Booting error - Unable to specify channel
2: No such device


On Sunday 11 April 2004 05:55 pm, Todd Lieberman wrote:
> modprobe your zaptel hardare...
The modules are automatically loaded at boot time.  To make sure I had the 
modules loaded, I did "lsmod", and the Asterisk related modules are listed 
as:
wcusb                  17600   0  (unused)
wcfxs                  54944   0  (unused)
wcfxo                   8992   0  (unused)
zaptel                182752   0  [wcusb wcfxs wcfxo]

Also, one of the channels on the TDM400P is lit.

I don't understand why wcusb is getting loaded because I do not have an 
Asterisk USB device.  Could that be part of the problem?

BTW - I forgot to include in my original message the output of ztcgf:
Zaptel Configuration
======================


Channel map:

Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXO Loopstart (Default) (Slaves: 02)

2 channels configured.


Any other ideas?

Thanks,
Anon

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users