[Asterisk-Users] Booting error - Unable to specify channel 2: No such device

[Anon]

Hello All,
I am getting a set of errors when I boot Asterisk that I have not been able to 
solve.  What is causing these error(s)?

Asterisk boot output:
==============
Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support 
Services, Inc.
Written by Mark Spencer <markster at linux-support.net>
=========================================================================
[ Booting..................Apr 11 17:42:50 WARNING[16384]: chan_zap.c:684 
zt_open: Unable to specify channel 2: No such device
Apr 11 17:42:50 ERROR[16384]: chan_zap.c:5357 mkintf: Unable to open channel 
2: No such device
here = 0, tmp->channel = 2, channel = 2
Apr 11 17:42:50 ERROR[16384]: chan_zap.c:7482 setup_zap: Unable to register 
channel '2'
Apr 11 17:42:50 WARNING[16384]: loader.c:313 ast_load_resource: chan_zap.so: 
load_module failed, returning -1
    -- Unregistered channel 1
    -- Unregistered channel 2
Apr 11 17:42:50 WARNING[16384]: loader.c:408 load_modules: Loading module 
chan_zap.so failed!


My zaptel.conf:
==========
loadzone=us
defaultzone=us
# Load FXO device (a X100P PSTN card) as Channel 1
fxsls=1
#
# Load FXS device (a TDM400P) as Channel 2
fxols=2


My zapata.conf:
==========
[channels]
language=en
context=pstn
signalling=fxs_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=+0
txgain=+0
channel => 1 ;Channel 1 will be the X100P PSTN card

language=en
context=CustomerSide
signalling=fxo_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
channel => 2 ;Channel 2 will be the TDM400P card



Thanks in advance for any help,
Anon