[Asterisk-Users] syslog error

[Steven Kokinos]

Hello,

I have been running into a problem on my server (which I believe was 
the cause of an O/S crash earlier today). I am consistently seeing the 
following messages in /var/log/messages:

Apr  8 05:24:04 east insmod: /lib/modules/2.4.20-8/misc/torisa.o: 
insmod char-major-196 failed
Apr  8 05:24:04 east kernel: Zapata Telephony Interface Registered on 
major 196
Apr  8 05:24:04 east kernel: No ISA tormenta card found at d0000
Apr  8 05:24:04 east kernel: Zapata Telephony Interface Unloaded
Apr  8 05:24:04 east kernel: Zapata Telephony Interface Registered on 
major 196
Apr  8 05:24:04 east kernel: No ISA tormenta card found at d0000
Apr  8 05:24:04 east kernel: Zapata Telephony Interface Unloaded
Apr  8 05:24:04 east insmod: /lib/modules/2.4.20-8/misc/torisa.o: 
init_module: Input/output error
Apr  8 05:24:04 east insmod: Hint: insmod errors can be caused by 
incorrect module parameters, including invalid IO or IRQ parameters.    
    You may find more information in syslog or the output from dmesg

I have put the following line in modules.conf (under [modules]):

noload => chan_zap.so

And I am also receiving the following error when doing a modprobe of 
ztdummy:

/lib/modules/2.4.20-8/kernel/drivers/usb/usb-uhci.o: init_module: No 
such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
       You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/kernel/drivers/usb/usb-uhci.o: insmod 
/lib/modules/2.4.20-8/kernel/drivers/usb/usb-uhci.o failed
/lib/modules/2.4.20-8/kernel/drivers/usb/usb-uhci.o: insmod ztdummy 
failed

Does anyone have any ideas on why this might be happening? It looks to 
me like either something is missing on my system or I did something 
incorrectly at compile time.

Regards,

-Steve