[Asterisk-Users] Different PTSN Hangup problem

[Matt Riddell]

Figure out the frequency (in Hz) and cadences (in milliseconds) for your
fujitsu and make your own country in indications.conf.

Matt Riddell
----- Original Message ----- 
From: "Kyle Hagan" <khagan at nuvoinc.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, April 09, 2004 11:10 AM
Subject: [Asterisk-Users] Different PTSN Hangup problem


| Have a question. Similar to others problems.
|
| the PTSN doesnt detect a hangup when going to voicemail. So it continues
to
| record until time limit is reached.
| I CANT use Silence Detections because its plugged into single line
| extentions on our OLD Fujitsu starlog and as soon as they hang up a fast
| busy is played from the Fujitsu system. So I get a 15 second message and
| they hang up and the rest is fast busy signal.
|
|  We are going to start off using asterisk as a voice mail system with some
| sip clients attached to our Fujitsu. But it will be bad if every message
| saved to the voicemail is going to be large (60seconds), even if the
message
| is only 10 sec or the user hangs up before leaving a message. If they
press
| # after every message it would be ok I guess.
|
| Can anyone think of anything I can try??
|
| Kyle
|
| _______________________________________________
| Asterisk-Users mailing list
| Asterisk-Users at lists.digium.com
| http://lists.digium.com/mailman/listinfo/asterisk-users
| To UNSUBSCRIBE or update options visit:
|    http://lists.digium.com/mailman/listinfo/asterisk-users