[Asterisk-Users] Zapata required?

[Steven Kokinos]

Ho do I go about loading the ztdummy driver after unloading zap?

Thanks,

-Steve 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Michiel Betel
> Sent: Thursday, April 08, 2004 10:55 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Zapata required?
> 
> Steve,
> 
> No you don't need the zap drivers if you are not using 
> zap-based hardware. You might want to use the ztdummy driver 
> though as a timing source for conferencing.
> Since the asterisk zaptel  support is in a loadable module 
> you can instruct Asterisk *not* to use it by specifiing
>     noload =>  chan_zap.so
> in  /etc/asterisk/modules.conf
> 
> Steven Kokinos wrote:
> 
> > Hello-
> >  
> > As part of the asterisk build/installation instructions it mentions 
> > that the zaptel drivers should be built and configured first. My 
> > question is whether they are required at all, in the case 
> of a system 
> > with no hardware cards at all (as is the situation in my case).
> >  
> > With them loaded I continually get the following message on 
> my console 
> > (server not asterisk):
> >  
> > Zapata Telephony Interface Registered on major 196 No ISA tormenta 
> > card found at d0000 Zapata Telephony Interface Unloaded
> >  
> > which seems logical given that I don't have any zap hardware. how 
> > would i go about unloading this module and/or does it need to be 
> > compiled at all in this case?
> >  
> > Regards,
> >  
> > -Steve
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>