[Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750

[Bisker, Scott (7805)]

Same as mine.  Do you know off the top of your head what firwmare you're using?  Also, what RAS card do you have on your PCAnywhere side?


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Ariel Batista
Sent: Wednesday, April 07, 2004 10:39 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config.
Adtran 750


Bisker, Scott (7805) wrote:
> I've been trying to get a Win 2000 RAS server working with my
> asterisk PBX for quite some time, to no avail.  I've googled, I've
> tried loads of configurations, I've rewired phone lines, and still I
> am not winning the battle.
>
> Here's my config.
>
> PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server.
>
>
> I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS
> channels, On-Hook messaging disabled, the rest defaults for the
> channels.  In zapata.conf I've tried with both busydetect=>yes and
> busydetect=>no.... busycount=>6, busycount=>10, callprogress=>yes,
> callprogress=>no all combinations.
>

We have 4 750's and one TSU 600 working with PC anywhere for data
communications for our support department.  We have on this system 2
T400P's.  The only thing I can say is who are you getting your timing from.
We are able to get modem calls and faxes without problems.  But this is only
using PRI from Allegenice.  We also have a LD service T1 from Sprint that is
in no way able to handle any data calls.  Our Adtrans are out of the box
without any changes to them.   This is our settings in our zapata.conf.

; Enable echo cancellation
echocancel=yes
;echocancelwhenbridged=yes
immediate=no
;adsi=yes
usecallerid=yes
hidecallerid=no
;callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
musiconhold=default
signalling = fxo_ks

Hope this helps.

> The weird thing is, that if I forward the incoming call from the PRI
> out another channel on the PRI into a POTS line hooked into the RAS
> server, the connection is fine.  In my view, that rules out the PRI
> and points the blame at either how the adtran is configured, or the
> how the channel itself is configured.
>
> Can anyone with a _working_ configuration similar to this chime in
> with some config info on the Zap channel and the channel bank config?
>
> Thanks in advance.
>
> -sb
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users