[Asterisk-Users] quadBRI card installation issues

Thu Apr 1 17:16:32 MST 2004

Hi there,

I am attempting to set up a simple BRI and SIP based platform using * 
with the quadbri card (it's not sharing an IRQ). I enclose my zaptel and 
zapata.conf files. For the inital test I'm simply trying to connect to 
the * demo menu.

The drivers compile (with a few warning that I believe aren't important 
- see attachments). chan_zap comiles with the warning:

chan_zap.c: In function `pri_dchannel':
chan_zap.c:6344: warning: passing arg 1 of `pbx_builtin_setvar_helper' 
from incompatible pointer type

The qozap driver appears to load correctly and I get this in the log :

Apr  1 17:51:07 debian kernel: Zapata Telephony Interface Registered on 
major 196
Apr  1 17:51:07 debian kernel: qozap: start
Apr  1 17:51:07 debian kernel: PCI: Enabling device 00:0b.0 (0000 -> 0003)
Apr  1 17:51:07 debian kernel: PCI: Found IRQ 10 for device 00:0b.0
Apr  1 17:51:07 debian kernel: qozap: quadBRI card configured at mem 
0xd0888000 IRQ 10 HZ 100 CardID 0
Apr  1 17:51:07 debian kernel: S/T port 1 is in TE mode.
Apr  1 17:51:07 debian kernel: S/T port 2 is in TE mode.
Apr  1 17:51:07 debian kernel: S/T port 3 is in TE mode.
Apr  1 17:51:07 debian kernel: S/T port 4 is in TE mode.
Apr  1 17:51:07 debian kernel: qozap: registered zaptel span 1.
Apr  1 17:51:07 debian kernel: qozap: registered zaptel span 2.
Apr  1 17:51:07 debian kernel: qozap: registered zaptel span 3.
Apr  1 17:51:07 debian kernel: qozap: registered zaptel span 4.
Apr  1 17:51:07 debian kernel: card 1 span 1 state F0 (A_ST_RD_STA = 0x0)
Apr  1 17:51:07 debian kernel: card 1 span 2 state F0 (A_ST_RD_STA = 0x0)
Apr  1 17:51:07 debian kernel: card 1 span 3 state F0 (A_ST_RD_STA = 0x0)
Apr  1 17:51:07 debian kernel: card 1 span 4 state F0 (A_ST_RD_STA = 0x0)
Apr  1 17:51:07 debian kernel: qoztmp->cardno = 1
Apr  1 17:51:07 debian kernel: qozap: 1 multiBRI card(s) in this box, 4 
BRI ports total.
Apr  1 17:51:07 debian kernel: Registered tone zone 4 (United Kingdom)
Apr  1 17:51:07 debian kernel: qozap: starting card 1 span 1/0.
Apr  1 17:51:07 debian kernel: card 1 span 1 state F6 (A_ST_RD_STA = 0x16)
Apr  1 17:51:07 debian kernel: card 1 span 1 state F7 (A_ST_RD_STA = 0x17)

However when running * I get the message below every 2-3 seconds:

Apr  1 18:10:55 WARNING[11276]: PRI: !! Got S-frame while link down

Attempting to call the line does not result in it being answered but I 
get the error:

Apr  1 18:11:23 WARNING[11276]: PRI: !! Got I-frame while link state 0

When the line starts to ring and again when I hang up.

I'm using a bt buisness highway line which is isdn2e comaptible but 
doesn't provide power on the digital socket.

Any suggestions on how to resolve this would be greatly appreciated. I 
can find nothing on this in the list archives (though similar errors 
have been seen using a t410p card under high call load:  
http://lists.digium.com/pipermail/asterisk-users/2004-March/040745.html )

I'm using the bri-stuff rc15 from:

http://www.junghanns.net/asterisk/downloads/bri-stuff-0.0.2rc15.tar.gz

Thanks in advance for any suggestions,

regards,

Julien

-------------- next part --------------
cc -Wall -Wstrict-prototypes -Wmissing-prototypes -g     -c -o pri.o pri.c
pri.c: In function `pri_hangup':
pri.c:253: warning: implicit declaration of function `q921_hangup'
cc -Wall -Wstrict-prototypes -Wmissing-prototypes -g     -c -o q921.o q921.c
q921.c:134: warning: no previous prototype for `q921_send_teireq'
q921.c:302: warning: no previous prototype for `q921_send_sabme'
q921.c: In function `__q921_receive':
q921.c:1227: warning: array subscript has type `char'
q921.c:1228: warning: array subscript has type `char'
q921.c: At top level:
q921.c:235: warning: `q921_send_teiverify' defined but not used
cc -Wall -Wstrict-prototypes -Wmissing-prototypes -g     -c -o prisched.o prisched.c
cc -Wall -Wstrict-prototypes -Wmissing-prototypes -g     -c -o q931.o q931.c
q931.c: In function `transmit_calling_party_number':
q931.c:895: warning: control reaches end of non-void function
q931.c: In function `q921_getcall':
q931.c:1423: warning: assignment from incompatible pointer type
q931.c:1432: warning: assignment from incompatible pointer type
q931.c: At top level:
q931.c:1776: warning: no previous prototype for `q931_information_special'
q931.c:1836: warning: no previous prototype for `q931_hold_acknowledge'
q931.c:1843: warning: no previous prototype for `q931_hold_reject'
q931.c:2107: warning: no previous prototype for `q921_hangup'
q931.c: In function `q921_hangup':
q931.c:2133: warning: assignment from incompatible pointer type
q931.c: In function `q931_receive':
q931.c:2256: warning: unused variable `ttei'
q931.c:2255: warning: unused variable `i'
q931.c: At top level:
q931.c:1284: warning: `transmit_my_paging_signal' defined but not used
ar rcs libpri.a pri.o q921.o prisched.o q931.o
ranlib libpri.a
cc -fPIC -Wall -Wstrict-prototypes -Wmissing-prototypes -g   -o pri.lo -c pri.c
pri.c: In function `pri_hangup':
pri.c:253: warning: implicit declaration of function `q921_hangup'
cc -fPIC -Wall -Wstrict-prototypes -Wmissing-prototypes -g   -o q921.lo -c q921.c
q921.c:134: warning: no previous prototype for `q921_send_teireq'
q921.c:302: warning: no previous prototype for `q921_send_sabme'
q921.c: In function `__q921_receive':
q921.c:1227: warning: array subscript has type `char'
q921.c:1228: warning: array subscript has type `char'
q921.c: At top level:
q921.c:235: warning: `q921_send_teiverify' defined but not used
cc -fPIC -Wall -Wstrict-prototypes -Wmissing-prototypes -g   -o prisched.lo -c prisched.c
cc -fPIC -Wall -Wstrict-prototypes -Wmissing-prototypes -g   -o q931.lo -c q931.c
q931.c: In function `transmit_calling_party_number':
q931.c:895: warning: control reaches end of non-void function
q931.c: In function `q921_getcall':
q931.c:1423: warning: assignment from incompatible pointer type
q931.c:1432: warning: assignment from incompatible pointer type
q931.c: At top level:
q931.c:1776: warning: no previous prototype for `q931_information_special'
q931.c:1836: warning: no previous prototype for `q931_hold_acknowledge'
q931.c:1843: warning: no previous prototype for `q931_hold_reject'
q931.c:2107: warning: no previous prototype for `q921_hangup'
q931.c: In function `q921_hangup':
q931.c:2133: warning: assignment from incompatible pointer type
q931.c: In function `q931_receive':
q931.c:2256: warning: unused variable `ttei'
q931.c:2255: warning: unused variable `i'
q931.c: At top level:
q931.c:1284: warning: `transmit_my_paging_signal' defined but not used
cc -shared -Wl,-soname,libpri.so.1 -o libpri.so.1.0 pri.lo q921.lo prisched.lo q931.lo
/sbin/ldconfig -n .
ln -sf libpri.so.1 libpri.so
-------------- next part --------------
cc -c qozap.c -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -fomit-frame-pointer -O2 -Wall -I/usr/src/linux/include -I../zaptel -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h  -DCONFIG_ZAPATA_BRI_DCHANS
qozap.c: In function `qoz_iotest':
qozap.c:55: warning: int format, long int arg (arg 4)
qozap.c: In function `qoz_fifo_tx':
qozap.c:214: warning: array subscript has type `char'
qozap.c:214: warning: array subscript has type `char'
qozap.c:219: warning: array subscript has type `char'
qozap.c:219: warning: array subscript has type `char'
qozap.c:225: warning: array subscript has type `char'
qozap.c:225: warning: array subscript has type `char'
qozap.c:230: warning: array subscript has type `char'
qozap.c:230: warning: array subscript has type `char'
qozap.c:232: warning: array subscript has type `char'
qozap.c:232: warning: array subscript has type `char'
qozap.c:237: warning: array subscript has type `char'
qozap.c:237: warning: array subscript has type `char'
qozap.c:246: warning: array subscript has type `char'
qozap.c:252: warning: array subscript has type `char'
qozap.c:252: warning: array subscript has type `char'
qozap.c:260: warning: array subscript has type `char'
qozap.c:260: warning: array subscript has type `char'
qozap.c:209: warning: unused variable `temp'
qozap.c: In function `qoz_fifo_dostuff':
qozap.c:270: warning: unused variable `data'
qozap.c:270: warning: unused variable `i'
qozap.c:270: warning: unused variable `f2'
qozap.c:270: warning: unused variable `f1'
qozap.c:269: warning: unused variable `chan'
qozap.c:268: warning: unused variable `stport'
qozap.c: In function `qoz_fifo_rx':
qozap.c:321: warning: array subscript has type `char'
qozap.c:322: warning: array subscript has type `char'
qozap.c:327: warning: array subscript has type `char'
qozap.c:327: warning: array subscript has type `char'
qozap.c:339: warning: array subscript has type `char'
qozap.c:341: warning: array subscript has type `char'
qozap.c:369: warning: array subscript has type `char'
qozap.c:369: warning: array subscript has type `char'
qozap.c:376: warning: array subscript has type `char'
qozap.c:376: warning: subscript has type `char'
qozap.c:376: warning: array subscript has type `char'
qozap.c:376: warning: subscript has type `char'
qozap.c:376: warning: array subscript has type `char'
qozap.c:376: warning: subscript has type `char'
qozap.c: In function `qoz_prepare_rx':
qozap.c:390: warning: array subscript has type `char'
qozap.c:391: warning: array subscript has type `char'
qozap.c:394: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:396: warning: array subscript has type `char'
qozap.c:397: warning: array subscript has type `char'
qozap.c:398: warning: array subscript has type `char'
qozap.c:398: warning: array subscript has type `char'
qozap.c:398: warning: array subscript has type `char'
qozap.c:399: warning: array subscript has type `char'
qozap.c:399: warning: array subscript has type `char'
qozap.c:401: warning: array subscript has type `char'
qozap.c:402: warning: array subscript has type `char'
qozap.c:402: warning: array subscript has type `char'
qozap.c:405: warning: array subscript has type `char'
qozap.c:405: warning: array subscript has type `char'
qozap.c:408: warning: array subscript has type `char'
qozap.c:408: warning: array subscript has type `char'
qozap.c:409: warning: array subscript has type `char'
qozap.c:409: warning: array subscript has type `char'
qozap.c: In function `qoz_interrupt':
qozap.c:460: warning: unused variable `x'
qozap.c:460: warning: unused variable `s'
qozap.c: In function `ztqoz_shutdown':
qozap.c:695: warning: unused variable `flags'
qozap.c: At top level:
qozap.c:30: warning: `odd' defined but not used
qozap.c:267: warning: `qoz_fifo_dostuff' defined but not used
sync
-------------- next part --------------
loadzone=uk
defaultzone=uk
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
-------------- next part --------------
;
; Zapata telephony interface
;
; Configuration file

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net

pridialplan = local
group = 1
context=demo
channel => 1-2,4-5,7-8,10-11