[Asterisk-Users] ANNOUNCE: Flash Operator Panel

[reseaux]

Dear Nicolas 
	i have try you demo from your site and i think is very great!! So i decide to 
test on my simple pbx but ops.. some problem :-) i have create a subdir 
called "astweb" in my html directory and put inside your "html" dir and the 
perl script under dir "astweb/panel" this to have a url like 
"http://myhost/astweb/"
and i start op_server in debug mode and i see:
------------------------
I es igual a:
--------
Asterisk Call Manager/1.0
Response: Success
Message: Authentication accepted


-------
Largo de i: 82
------
Es un fin de linea!
No tiene event ni END, vacio los datos
Bloque else para escribir a cliente flash
I es igual a:
--------
Response: Follows
Name/username    Host                 Mask             Port     Status
test1/test1      192.168.1.159   (D)  255.255.255.255  5060     OK (3 ms)
test2/test2        (Unspecified)   (D)  255.255.255.255  0        UNKNOWN
test3/test3  192.168.1.160   (D)  255.255.255.255  5060     OK (3 ms)
--END COMMAND--


-------
Largo de i: 338
------
Es un fin de linea!
El bloque tiene END en el texto
--- Empieza procesa_comando -----

--- Termina procesa_comando - hay 3 bloques ----
Hay 3 bloques para procesar
---- Empieza Digiere bloques ----
Voy a procesar un bloque


--- Empieza Procesa_bloque ---
Puso evento en switch regstatus
Evento Regstatus
Mensaje final digerido: <response data="|registrado|No registrado "/>
Voy a procesar un bloque


--- Empieza Procesa_bloque ---
Puso evento en switch regstatus
Evento Regstatus
Mensaje final digerido: <response data="|noregistrado|No registrado "/>
Voy a procesar un bloque


--- Empieza Procesa_bloque ---
Puso evento en switch regstatus
Evento Regstatus
Mensaje final digerido: <response data="|registrado|No registrado "/>
---- Termina Digiere bloques ----
Bloque else para escribir a cliente flash
Escribo respuesta al cliente: <response data="|registrado|No registrado "/>
Escribo respuesta al cliente: <response data="|noregistrado|No registrado "/>
Escribo respuesta al cliente: <response data="|registrado|No registrado "/>
--------------------------------------
Can you give some hits about this debug :-)
Thank in advance
Dimitri



On Thursday 01 April 2004 20:52, Nicolas Gudino wrote:
> http://sip.house.com.ar/operator
>
> Its a server/client combo that displays the status of your Asterisk PBX
> in a web browser in real time.
>
> You can also perform some actions. Hang-up channels and Transfers via
> drag and drop.
>
> The difference with other similar tools is that it displays status in
> real time (no refreshing necessary), and its graphically appealing.
>
> It's a work in progress... so expect some bugs. I appreciate any
> feedback you can give me.
>
> Best regards,