[Asterisk-Users] Carrier Access CMG/FXS MGCP to Asterisk, Works Fine

[Sean Cheesman]

JR,
 
This is the third time you've posted this same information.  We are all
glad that you're contributing to the community, but not over and over!
Also, you might want to add this to the Wiki if you already haven't.
Thanks,
 
Sean

	-----Original Message-----
	From: JR Richardson [mailto:jr.richardson at cox.net] 
	Sent: Tuesday, March 30, 2004 7:02 PM
	To: asterisk-users at lists.digium.com
	Subject: [Asterisk-Users] Carrier Access CMG/FXS MGCP to
Asterisk, Works Fine
	
	

	FYI,

	 

	Follow the Quick Start Guide from Carrier Access to setup the
CMG (Customer Media Gateway) Router card.  Follow the Asterisk mgcp.conf
wiki page setup.  The only issue I had was with the CAC CMG card, it
defaults to strict policy message exchange and dial-tone will not come
across when you go off-hook on a FXS port.  To resolve this, get back
into the CAC CMG configuration, goto:

	-profile directory - router card setup - MGCP Configure - MGCP
Interoperability Settings - (set) Parse Mode: Lenient

	 

	Either Carrier Access or Asterisk is not completely compatible
with the RFC, but this seems to get the two talking together.

	 

	Hope this helps.

	 

	JR

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040401/53f43287/attachment.htm