[Asterisk-Users] D-Channel on span 1 down

[zouhair echchelh]

Hi,

Any Idea about this message error are welcome, this cause communication 
cuts.

== D-Channel on span 1 down
MFE for TEI = 84
 == D-Channel on span 1 up


this is my zapata.conf file
;signalling = bri_cpe
pridialplan = unknown
;echocancel = yes
echocancel = no
immediate=no
; BRI line plugged into S/T port 4
group = 1
;signalling = bri_cpe
signalling = bri_cpe_ptmp
context=isdn
pridialplan = unknown
channel => 1,2
channel => 4,5
;group = 2
;signalling = bri_cpe_ptmp
;context=isdn
;pridialplan = unknown
;channel => 4,5
;channel => 7,8
;channel => 10,11
; add some of these if you plug in more lines
;channel => 1-2,4-5,7-8,10-11


when I put :

signalling = bri_cpe

I got only this message :

 == D-Channel on span 1 up
 == D-Channel on span 1 up
 == D-Channel on span 1 up
 == D-Channel on span 1 up
 == D-Channel on span 1 up
 == D-Channel on span 1 up
 == D-Channel on span 1 up

And my asterisk box shutdown

I use the quadriBRI from Junghanns.NET/

Best Regards.

Echchelh Zouhair