[Asterisk-Users] built in dial functions?

[Martin Pycko]

These functions are implemented only for chan_zap (zaptel hardware) and
work for FXS/FXO ports. Exception is *8 (remote call pickup) as far as I
know.

regards
Martin

On Fri, 19 Sep 2003, Rich Adamson wrote:

> Someone recently posted the following list as functions built into *
>
> *0#  sends flash
> *8#  remote call pickup (pickup phone in your group)
> *67# disable caller id
> *70# no call waiting
> *78# do not disturb on
> *79# do not disturb off
> *72# enable call forwarding
> *73# disable call forwarding
> *82# enable callerid
>
> I'm running a CVS from a couple of weeks ago with multiple C7960's,
> snom 200, ata186, links to fwd and iaxtel, two x100p incoming fx
> lines, MoH, etc. Everything attempted to date is now working fine.
>
> However, testing the above list tends to suggest they don't work (or
> at least they don't work as I would expect them to.)
>
> Example, from a C7960 I dial *78# and hang up. From another sip phone
> I Dial that extenstion and the 7960 rings. I expected the call to roll
> over to voicemail or something. Am I missing something here, or are
> these functions not expected to work on a per-extension basis?
>
> I was assuming (probably incorrectly) these functions were custom
> calling features implemented within * for all extensions. Are my
> assumptions wrong or do I have to implement something for these to
> work?
>
> TIA,
> Rich
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>