[Asterisk-Users] SwissVoice MGCP IP10S

[Florian Overkamp]

Hi, 

> -----Original Message-----
> >The following comes on the Asterisk console at powerup.  The 
> items between
> >the **** repeat.
> >MGCP Show endpoints doesn't show anything.  Evidently the phone isn't
> >registered but not sure why since there doesn't seem to be a place to
> >associate a userid or password.

MGCP works on IP basis, it has no userid's or passwords.

> >MGCP read: I>
> >RSIP 1529 aaln/1@[192.168.0.5] MGCP 1.0 NCS 1.0
> >RM: restart
> >
> >from 192.168.0.5:2427MGCP read:
> >RSIP 1529 aaln/1@[192.168.0.5] MGCP 1.0 NCS 1.0
> >RM: restart
> >
> >from 192.168.0.5:2427Verb: 'RSIP', Identifier: '1529', Endpoint:
> >'aaln/1@[192.168.0.5]', Version: 'MGCP 1.0'
> >2 headers, 0 lines
> >MGCP read: I>
> >RSIP 1529 aaln/1@[192.168.0.5] MGCP 1.0 NCS 1.0
> >RM: restart
> >**************************************************
> >from 192.168.0.5:2427MGCP read:
> >RSIP 1529 aaln/1@[192.168.0.5] MGCP 1.0 NCS 1.0
> >RM: restart
> >
> >from 192.168.0.5:2427Verb: 'RSIP', Identifier: '1529', Endpoint:
> >'aaln/1@[192.168.0.5]', Version: 'MGCP 1.0'
> >2 headers, 0 lines
> >MGCP read: I>
> >RSIP 1529 aaln/1@[192.168.0.5] MGCP 1.0 NCS 1.0
> >RM: restart
> >*****************************************************


> change the name of your gate from [192.168.0.5] to ip10

Can you clarify why that should help ? It doesn't in my setup (with none of
my mgcp equipment)

Florian