[Asterisk-Users] 2 X100Ps give error

[Cameron Palmer]

It looks like they have their own IRQ 10 and 11. 

cameron.

On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote:

> Try to do cat /proc/pci. You must verify that card doesn't share IRQ
> with USB or other component.
> 
> 
> srsergio
> 
> 
> 
> 
> -----Mensaje original-----
> De: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] En nombre de Cameron
> Palmer
> Enviado el: viernes, 31 de octubre de 2003 8:32
> Para: asterisk-users at lists.digium.com
> Asunto: RE: [Asterisk-Users] 2 X100Ps give error
> 
> 
> 
> RESULTS of your suggestion. I had tried similar variations from the 
> mailing list archives the result was the same.
> 
> # modprobe wcfxo
> ZT_CHANCONFIG failed on channel 2: No such device or address (6)
> /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed
> /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed
> 
> # ztcfg -vvvv
> Zaptel Configuration
> ======================
> 
> Channel map:
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 
> 2 channels configured.
> 
> ZT_CHANCONFIG failed on channel 2: No such device or address (6)
> 
> 
> cameron.
> 
> 
> On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote:
> 
> > Try to load module manually: modprobe wcfxo; ztcfg -vvvv
> > 
> > srsergio
> > 
> > 
> > 
> > 
> > -----Mensaje original-----
> > De: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] En nombre de Cameron 
> > Palmer Enviado el: viernes, 31 de octubre de 2003 6:27
> > Para: asterisk-users at lists.digium.com
> > Asunto: [Asterisk-Users] 2 X100Ps give error
> > 
> > 
> > I have two X100Ps in my zaptel.conf and have it configured:
> > 
> > fxsks=1-2
> > 
> > When starting rc.zaptel I get the error:
> > 
> > Loading zaptel framework...
> > Loading zaptel hardware modules: wcfxo wcusb
> > Running ztcfg...
> > ZT_CHANCONFIG failed on channel 2: No such device or address (6)
> > 
> > As far as I can tell from the archived mailing lists I shouldn't have 
> > this problem.
> > 
> > I do notice a difference in lspci which concerns me:
> > 
> > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 
> > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537
> > 
> > Why is one listed as a Communication controller and the other a serial
> > controller?
> > 
> > What I'm trying to do...
> > I have activated the second line option and put it into a call hunt 
> > with
> > 
> > the first line on my Vonage account. At the office I have a Konexx DWI
> > connecting my Nortel phone to my desktop running RedHat and a X100P.
> My 
> > goal is seamless (as far as my boss in Santa Cruz can tell)
> connectivity
> > 
> > between home and office but maintaining a low ongoing cost. Namely 
> > about
> > 
> > $60 per month.
> > 
> > Other details...
> > 
> > The home setup -
> > 2 7960G SIP phones
> > 1 ATA-186
> > Linux (slackware 9.1) 2.4.22 on PIII 650MHz
> > Connected to Vonage over the POTS.
> > 2 X100P FXO Cards
> > 
> > The office setup -
> > Dell Precision 650
> > Redhat 9
> > 1 X100P FXO Card
> > Konexx DWI connected to Nortel phone
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>