[Asterisk-Users] 2 X100Ps give error

Fri Oct 31 00:05:50 MST 2003

Try to load module manually: modprobe wcfxo; ztcfg -vvvv

srsergio

-----Mensaje original-----
De: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] En nombre de Cameron
Palmer
Enviado el: viernes, 31 de octubre de 2003 6:27
Para: asterisk-users at lists.digium.com
Asunto: [Asterisk-Users] 2 X100Ps give error

I have two X100Ps in my zaptel.conf and have it configured:

fxsks=1-2

When starting rc.zaptel I get the error:

Loading zaptel framework... 
Loading zaptel hardware modules: wcfxo wcusb
Running ztcfg...
ZT_CHANCONFIG failed on channel 2: No such device or address (6)

As far as I can tell from the archived mailing lists I shouldn't have
this 
problem. 

I do notice a difference in lspci which concerns me: 

00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537
00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537

Why is one listed as a Communication controller and the other a serial 
controller?

What I'm trying to do...
I have activated the second line option and put it into a call hunt with

the first line on my Vonage account. At the office I have a Konexx DWI 
connecting my Nortel phone to my desktop running RedHat and a X100P. My 
goal is seamless (as far as my boss in Santa Cruz can tell) connectivity

between home and office but maintaining a low ongoing cost. Namely about

$60 per month. 

Other details...

The home setup -
2 7960G SIP phones
1 ATA-186
Linux (slackware 9.1) 2.4.22 on PIII 650MHz
Connected to Vonage over the POTS.
2 X100P FXO Cards

The office setup -
Dell Precision 650
Redhat 9
1 X100P FXO Card
Konexx DWI connected to Nortel phone

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users