[Asterisk-Users] Newbie hardware question

[Michael Bielicki]

the simplest would be to get a t100p card and a 16fxs + 8 fxo channel bank
u can find them on ebay quite often, I got mine for 500$ (Carrier access CAC-I 
with 12fxs and 12fxo)

cheers

Michael Bielicki

On Thursday 30 October 2003 6:00 pm, Just ME wrote:
> Hi,
> I have scanned through the archives of this list and found a number of
> question about hardware, but I just can not find the answer to my question.
> I am new to phone systems, I got "drafted" to come up with a new phone
> system for our company (I guess they figure since I know computers I know
> phone systems as well :O).
> We have 5 analog (I guess they are called PSTN lines) lines coming in and
> 16 clients (telephones) in our office.  I am not worried about the minimum
> computer requirements because I have a couple of spare P4 based servers
> with 512 megs of memory, but I need to know what cards should I be looking
> at using because I will run out of PCI slots if I use 4 TDM400P cards (for
> the clients) and 5 of the X100p (for the lines).
> Any help or advice would be greatly appreciated.
> Thanks
>
> Jon Hoffman

-- 
Michael Bielicki
Managing Director
TAAN Consultants Ltd
http://www.global-gateway.net/

--------------------------------------------------------------------------

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.