[Asterisk-Users] Channelbanks for use in europe (Sweden)

[Peter Brown]

At 21:39 29/10/03 +0100, you wrote:

>Hi!
>
>Is there anyone that are using a E1-channelbank and have any tips about some
>type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I
>think we're using some slightly modified version here in Sweden, but I'll
>check that tomorrow) and connect one port to a channelbank for 30 analogue
>telephones.
>
>It would also be great to get callerid on the analogue phones, so it would
>be intresting to know how
>the channelbank sends the callerid (DTMF or FSK) if it sends any callerid?
>
>Best regards, Lars Fredriksson
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users


Just remember part of the design of the TE410P is that you can use T1 
channel banks (you only get 24 ports) , if you buy these in America they 
are significantly cheaper than E1 channel banks. Just assign one of the 
incoming ports on the TE410P to be T1 not E1.

Peter